27 June 2022 in Applied Physics Letters
In this Letter, we report a 1060-nm vertical-cavity surface-emitting laser with intra-cavity surface relief engineering that provides transverse-resonance in transverse-coupled cavities, enabling single-mode operation and bandwidth enhancement at the same time. A single-mode power of over 2.5 mW and 3-dB modulation bandwidth enhancement from 15 to 23 GHz was demonstrated with an oxide aperture diameter as large as 6 μm. We obtained non-return-to-zero signals of up to 58 Gbps with eye-opening through a 5-km long standard single-mode fiber (G652). The 3-dB modulation bandwidth is enhanced by the negative dispersion of the fiber and pre-equalization via calibration of the end-to-end channel response. Our device shows great potential for its use in high-speed and compact optical transmitters in the next-generation hyper-scale datacenters and 6G network.
8 November 2021 in Applied Physics Letters
A high-power single-mode vertical cavity surface emitting laser (VCSEL) based on a slow light mode (SLM) concept is demonstrated. Shallow surface gratings were implemented to select a single slow light mode in mm long oxide aperture VCSELs. The vertical structure and well-established fabrication processes are unchanged from those of conventional 850 nm VCSELs. An electron-beam lithography is used to form a 1st-order shallow grating on the surface. Thanks to the low effective index and the intensity penetration of the SLM to the surface, the grating fabrication process is much easier than conventional guided mode distributed feedback lasers. A stable single mode with a high side suppression ration of more than 30 dB is obtained for the entire current range under CW operations. A narrow divergence of 0.038° in far field patterns is achieved for a 6 mm long device. A record single-mode power of more than 5 W is realized before saturation under 50 ns pulse operations. Unlike long cavity in-plane edge emitting lasers, a SLM-based VCSEL can provide higher output powers without limitation of catastrophic optical mirror damage. The high power, superior mode stability, and good beam quality of our unique design paves a way for VCSELs to be used for wide ranges of high-power applications.
11 July 2013 in IEEE Photonics Technology Letters
We demonstrate a micromachined tunable vertical-cavity surface-emitting laser with a monolithically formed anti-reflection (AR) layer for highly efficient electro-thermal wavelength tuning. The AR layer is formed by the lateral oxidation of an aluminum-rich AlGaAs layer and no extra process is needed. We fabricated a micromachined GaAs vertical-cavity surface-emitting laser and measured its wavelength tuning characteristic. The measurement result shows that the oxide layer functions as an AR layer for linear and efficient tuning characteristics. A large negative temperature dependence of wavelength from -0.24 to -2.0 nm/K was demonstrated using a thermally actuated cantilever for efficient electro-thermal wavelength tuning. An electro-thermal tuning efficiency of -2.3 to -4.8 nm/mW was obtained.
27 August 2014 in Optics Express
We demonstrate an athermal and electrostatically-tunable 850nm-band MEMS VCSEL for the first time. The thermal wavelength drift is compensated by the thermal actuation of a cantilever-suspended mirror with a bimorph effect. At the same time, the resonant wavelength can be continuously tuned by electro-static force as a voltage is applied in the cantilever structure. A continuous wavelength tuning of 10 nm is obtained with a low thermal wavelength drift, which is 10 times smaller than that of conventional VCSELs. Our athermal and tunable VCSELs enable us to reduce the channel spacing in course wavelength division multiplexing optical interconnects even under uncooled operations.
1 September 2014 in Applied Physics Letters
An athermal multi-wavelength vertical cavity surface emitting laser (VCSEL) array is demonstrated using a thermally actuated cantilever structure with different cantilever lengths. The cavity length of each VCSEL is precisely controlled via the deflection of the cantilever due to difference in the lattice constant of GaAlAs layers. Also, the thermally induced actuation of the cantilever reduces the cavity length as the ambient temperature increases, which compensates the thermal wavelength drift of the VCSEL. The wavelength drift could be reduced within ±0.017 nm/K, which is 4 times smaller than that of conventional VCSELs. The proposed multi-wavelength VCSEL array enables four wavelength channels with 2.5 nm spacing under uncooled operations.
17 August 2015 in Applied Physics Letters
We report a high-speed electrical beam switching of vertical cavity surface emitting laser with a transverse coupled cavity. A high speed (sub-gigahertz) and large deflection angle (>30°) beam switching is demonstrated by employing the transverse mode switching. The angular switching speed of 900 MHz is achieved with narrow beam divergence of below 4° and extinction ratio of 8 dB. We also measured the near- and far-field patterns to clarify the origin of the beam switching. We present a simple one-dimensional Bragg reflector waveguide model, which well predicts the beam switching characteristic.