28 February 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Dielectric printed and plated waveguide components offer cost and weight benefits over metal printed equivalents, with silver plating using Tollens reagents holding significant advantages over electroplating. This work extends on previous demonstrations of this process in plating stereolithography (SLA) printed resin waveguide parts by investigating number of plating rounds, reaction temperature and plastic base. It is found that less than 1.5 dB/m attenuation is achievable in WR42 waveguide using white SLA plastic and silver plating, comparing favourably with the 10 dB/m achieved by printing the same part using Ti64 powder bed fusion. This process improvement is further demonstrated using waveguide power dividers, slow-wave delay sections and rectangular horn antennas.
23 May 2023 in International Journal of RF and Microwave Computer-Aided Engineering
Series feeds are commonly used in antenna arrays because of their compact size and low loss compared to corporate feeds but typically feature beam squint over wide bandwidths. This work proposes a series-fed waveguide horn array with reduced beam squint by introducing synthesized time delay sections between the horns and the feed line. The array, implemented in a WR42 waveguide, achieves 1.53° beam squint over a 4 GHz operating band, compared to 10.52° for a reference design without time delay compensation.