1 February 2011 in Construction and Building Materials
6 March 2013 in ISRN Civil Engineering
Capillary rise is an important cause of deterioration for plaster in building. This phenomenon has been studied by the tensiometric experimental technique. Structural and hydric characteristics of plaster have been determined. Decane, a perfectly impregnate fluid, has been used to calculate the porous constant characteristic called and other structural parameters like pore radius and specific surface. Evaluation of the sensibility of plaster for water has been evaluated in a second time. The angle constant and the capillary moisture content have been determined. A comparison between results for plaster and composite plaster with fiber has been done. The addition of glass and hemp fiber does not have important effect on hydric properties (angle constant), but we have observed influence on structural charecteristics (pore radius, porosity, and degree of heterogeneity).
1 April 2026 in SSRN Electronic Journal
The cylindrical hot wire probe is widely regarded as the most suitable transient technique for determining thermal properties in situ. While standard methods yield consistent thermal conductivity (λ) values for homogeneous materials, significant deviations occur when experimental thermograms exhibit a pronounced S-shaped curve, typical of highly porous materials.The λ value (Standard Method Limitations) is highly sensitive to the selection of the time interval [t1,t2]. In the presence of high contact resistance or high porosity, the linear regime is delayed; if the "long-term" condition is not strictly met, this often leads to an overestimation of thermal conductivity.This study addresses these limitations by employing the Jaeger model, which accounts for the probe’s heat capacity and the contact resistance (Rc). Unlike the standard method, this approach fits the entire thermogram, including early-stage non-linearities. This results in a more stable and physically accurate determination of λ, independent of arbitrary time-window selection.A major advantage of the Jaeger model over standard techniques is its ability to simultaneously identify multiple parameters via inverse modeling. Beyond thermal conductivity, this methodology allows for the extraction of volumetric heat capacity (ρCp) and thermal contact resistance (Rc).The proposed method involves partitioning the sigmoid curve into three distinct parts. A thermal-electrical analogy based on the sigmoid's profile is first utilized to estimate thermal characteristics (conductivity and diffusivity) before final validation using the Jaeger model.