8 September 2022 in IEEE Signal Processing Letters
This letter considers the joint design of transmit waveform and receive beamforming for low probability of intercept (LPI) of multiple-input multiple-output with frequency diverse array radar in cluttered environments. The goal is to maximize the output signal-to-interference-plus-noise ratio while controlling the transmit power at the target region which enhances LPI capability, subject to peak-to-average power ratio and similarity constraints. To tackle the formulated non-convex optimization problem, an alternating optimization algorithm based on the alternating direction method of multipliers is proposed. Simulation results are provided to validate the effectiveness of the developed method in terms of the objective function values as well as the transmit and receive beampatterns.
24 March 2023 in IEEE Wireless Communications Letters
This paper studies the spectral efficiency of a multiple-input multiple-output (MIMO) radar with frequency diverse array (FDA) and a MIMO communication system in the same frequency band. To suppress mutual interference for both systems, and enhance low probability of intercept (LPI) capability of radar system, we propose a joint design of the transmit waveform and receive filter of radar, and the code-book employed by the communication system to form its space-time code matrix. Our problem formulationis to maximize the signal-to-interference-plus-noise ratio (SINR) and simultaneously minimize the probability of target detection of the radar signal under the peak-to-average ratio and communication rate constraints. Since the design problem is non-convex, we first transform it into three sub-optimization problems. An iterative algorithm is then developed to solve these subproblems to obtain the solution of the original problem. Simulation results show that the devised approach can effectively reduce the mutual interference as well as increase the SINR and LPI for radar system.
25 October 2022 in Signal Processing
1 January 2024 in IEEE Transactions on Vehicular Technology
This article investigates the problem of frequency-invariant (FI) beamforming of wideband multiple-input multiple-output (MIMO) radars and presents two design criteria to synthesize wideband FI beampatterns under peak-to-average power ratio (PAPR) and nulling constraints. Precisely, the two criteria are to apply the least-squares and absolute errors, respectively, to approximate a desired transmit beampattern. Both criteria result in nonconvex constrained optimization problems. For the former, the solution is derived via reformulating the initial problem into a quadratic form, which can be solved by alternating direction method of multipliers (ADMM). For the latter, the design problem is formulated into an ${l_{1}}$ -norm real-valued form, which is solved iteratively by using a nested ADMM (N-ADMM) algorithm. Moreover, both the convergence and computational complexities of these two algorithms are discussed. Numerical simulations show that the obtained beampatterns by the proposed algorithms can well approximate the given beampattern under the required constraints.
1 November 2024 in IEEE Sensors Journal
The Interrupted Sampling Repeater Jamming (ISRJ) is adept at generating multiple false targets with high fidelity at radar receivers through sub-sampling, leading to significant challenges in detecting actual targets. This paper presents a novel approach to mitigate such jamming by jointly designing the transmit waveform and receive filter of a fully-polarimetric wideband radar system. In this study, we aim to minimize the sum of the target’s Integral SideLobe (ISL) energy and the jamming’s total energy at the filter output. To ensure effective control over the mainlobe energy levels, we impose equality constraints on the peak values of both the target and jamming signals. Additionally, a constant-module constraint is applied to the transmit signal to prevent distortion at the transmitter. We incorporate the modulation of the Target Impulse Response Matrix (TIRM) to align with wideband illumination scenarios, utilizing the average TIRM over a specific Target-Aspect-Angle (TAA) interval to mitigate sensitivity in the Signal-to-Interference plus Noise Ratio (SINR) related to TAA variations. To address this nonconvex optimization problem, we propose an efficient algorithm based on an alternating optimization framework. Within this framework, the alternating direction method of multipliers (ADMM) is employed to tackle the inner subproblems, yielding closed-form solutions at each iteration. Experimental results demonstrate the effectiveness of the proposed algorithm, highlighting the benefits of wideband radar illumination, the resilience of output SINR to TAA uncertainty, and the enhanced jamming suppression capabilities of the fully-polarimetric system.
5 January 2026 in IEEE Internet of Things Journal
To address the challenges of ensuring communication security for legitimate users in the presence of eavesdroppers and the limited detection performance for extended targets in an Integrated Sensing and Communication (ISAC) system, this paper proposes a secure waveform design method for a multi-input multi-output (MIMO) ISAC system, under a stochastic Target Impulse Response (TIR) model. Firstly, To prevent confidential information in ISAC systems from being intercepted by unauthorized users, transmit waveforms and artificial noise(AN) are designed to maximize the sum secrecy rate of all communication users while ensuring individual user quality of service. Secondly, recognizing that accurate TIR information is unavailable in the practical detection environment, the stochastic TIR model is established under the assumption that prior errors follow a complex Gaussian distribution, and the robust detection probability of the extended target under the stochastic TIR is employed as a constraint to ensure the system’s detection performance. To solve this non-convex mixed max-min fractional programming(FP) problem, the Decomposition-Based Large Deviation Inequality (DBLDI) is adopted to convert the robust detection probability constraint into a convex constraint. By incorporating quadratic transform, inverse quadratic transform, and Lagrangian Dual Transform, a FP solution approach is developed to convert the mixed max-min FP problem into a convex problem. Finally, semidefinite optimization and alternating optimization methods are employed to iteratively optimize the transmit waveform, AN, and the receive filter. Additionally, the convergence and complexity analysis of the proposed method are provided. Simulation results demonstrate that the proposed method can guarantee the communication security of multiple legitimate users in the presence of multiple eavesdroppers. Meanwhile, it can also meet the stable detection requirements of extended targets, and the solution speed is nearly twice higher compared with the BTI method.