Modern storage systems for electric energy generated by solar photovoltaic plants and other renewable energy sources have been analyzed. Among numerous energy storage systems, electrochemical...
Decomposition reaction of monosilane in glow discharge plasma of both direct (DC) and alternating current (AC) have been performed. The possibility of nanosilicon synthesis using the glow discharge pl
This study investigates the formation of the optical properties and crystal structure of TiO2 thin films, with a thickness of approximately 1.5 micrometers, grown on a glass substrate using the atomic layer deposition method with titanium tetraisopropoxide and water as precursors. X-ray diffraction and Raman spectroscopy analyses confirmed that the TiO2 films crystallize in the anatase polymorphic phase. The films exhibit a nanocrystalline structure with an average crystallite size of approximately 28 nanometers, as established by X-ray diffraction measurements. The X-ray diffraction pattern revealed distinct peaks at 2θ angles of 25.3°, 38.6°, 48.0°, 55.0°, and 70.4°, corresponding to the (101), (112), (020), (121), and (220) crystallographic planes, while the Raman spectra exhibited pronounced peaks at frequencies of 143, 194, 392, 514, and 637 cm⁻¹, all characteristic of the anatase phase of TiO2. The Tauc method applied to the absorption spectra of the thin film showed that it has a direct bandgap of 3.2 eV and an indirect bandgap of 2.3 eV.
The present study is aimed at investigating the process of forming zinc oxide films on macroporous silicon using thermal atomic layer deposition. The macro
8 December 2025 in East European Journal of Physics
This study investigates the influence of substrate temperature on the morphological and structural characteristics of TiO2 thin films synthesized by thermal ALD using titanium tetraisopropoxide and water as precursors. The substrate temperature was varied from 200 to 275 °C in 25 °C increments. Surface morphology was examined using atomic force microscopy, while the crystalline structure was analyzed by XRD and Raman spectroscopy. It was found that films deposited at 200 °C exhibited an amorphous structure and a smooth, conformal surface with minimal roughness. Increasing the temperature to 225 °C led to the formation of microstructures and the emergence of initial signs of crystallization, accompanied by an increase in surface roughness. At 250-275 °C, a well-defined polycrystalline anatase structure was formed, characterized by grain development and nanostructure agglomeration, as evidenced by the increased intensity of diffraction peaks and higher surface roughness parameters. According to the XRD analysis, the average crystallite size ranged from 32 to 71 nm, depending on the synthesis temperature. The results demonstrate that deposition temperature exerts a comprehensive effect on both the phase composition and surface morphology of TiO2 films, which must be considered for their application in functional nanostructures, photocatalytic systems, sensors, and microelectronic devices.