A novel rotational internal combustion engine is invented and investigated. In this engine, no eccentric rotational component is used, resulting in vibration-free operation. For this characteristics, this engine will be suitable for usage in silent environment, e.g. co-generation house plant, handy-usage and so on. The engine mainly consists of a rotor casing and two types of rotor; cycloid rotor and trochoid rotor. The shape of the cycloid rotor is characterized by epicycloid surface and lobes, and the trochoid rotor also superior-epitrochoid surface and concaves. As mentioned above, fundamental process of intake, compression, ignition, expansion and exhaust for working gas is automatically performed by the constant speed rotation of both of rotors. In this paper, first, the typical configuration including two designing procedure of the rotors are described in detail. Next the cyclic behavior of the working process is explained. Furthermore the design drawing of the prototype engine is given. The time variations of chamber volume and pressure of typical configuration of the prototype engine are estimated. Also the comparison in engine compactness and compression ratio is made for another types of engine.
29 September 2016 in Flow, Turbulence and Combustion
The gaseous fuel-air coaxial jet flow and combustion under different fuel compositions are actively controlled through periodic excitation of the initial jet shear layer with arrayed miniature jet actuators equipped on the inner surface of the annular nozzle. In the present study, methane (CH4) is diluted by nitrogen (N2) or carbon dioxide (CO2) with various dilution rates to mimic biogas with different ratios of combustible and non-combustible components. The spatio-temporal development of the controlled jets are examined with phase-locked two-component particle image velocimetry (PIV). Firstly, it is found that the large-scale vortical structures and the associated mixing in the cold coaxial jets are flexibly controlled by changing the injection frequency fv of the miniature jets even for the different fuel dilution rates, which affect the momentum flux ratio of the coaxial jet. Based on the cold jet experiments, the present control scheme is applied to bluff-body held coaxial jet flames. The flame holding and emission characteristics for the controlled flames are evaluated under different dilution rates. It is demonstrated that the blow-off limits of the controlled flames are significantly extended to higher dilution rate as increase in fv. Moreover, carbon monoxide (CO) emission for different fuel dilution rates can be improved by manipulating the mixing upstream of the flame base. At low dilution rate, CO emission is drastically reduced through the enhanced mixing by the intense vortices, which realize highly-oxygenated combustion. On the other hand, at high dilution rate, low CO emission can be achieved through the local mixing enhancement near the inner shear layer by the weak vortices, which lead to relatively high temperature combustion.