Nickel doped copper oxide thin films were grown on glass and silicon substrates using radiofrequency sputtering in an argon–oxygen atmosphere. The impact of doping on the structural, optical, and electrical properties of copper oxide was examined for various contents of nickel. The X-ray diffraction results revealed the polycrystalline monoclinic structure of copper oxide for the prepared films. Raman spectroscopy confirmed that only the copper oxide phase is evidenced in nickel-doped copper oxide films. The band gap energy increased with increasing nickel content. All the sputtered films showed p-type conduction and the resistivity depends on the nickel content.
14 December 2022 in Materials Chemistry and Physics
In this paper, a ZnO/CdS/CuO:Co solar cell was prepared on a glass/ITO substrate. First we use RF sputtering to deposit the window (ZnO) layer by optimizing the oxygen pressure while keeping the RF power at 200 W. Fourier transform infrared and X-Ray reflectometry spectra were carried out and it is found that 30% of O2 is the optimal percentage to obtain the best density and the best refractive index for the ZnO layer. The CdS layer was then deposited by the sol-gel method to align the energy bands and a layer of CuO:Co with a thickness of 750 nm was deposited, also by reactive RF-sputtering technique. Finally, the electrical contacts were made by depositing circular silver electrodes. The obtained photovoltaic activity of device confirms that the aforementioned method is promising for further future optimizations.