A less-complex semi-globally practical finite-time stability (SGPFS) result is presented for thyristor-controlled series compensation (TCSC) model of the power system by using dynamic surface control (DSC), H∞ control and prescribed performance control (PPC) in this paper. Meanwhile, a set of preassigned finite-time functions (PFTF) are chosen. The designed controller makes the rotor angle converge to a predefined arbitrary small area within a finite-time interval and other states of the closed-loop system are bounded. In addition, the proposed design method is simpler and the presented result is also easier to be achieved. Finally, simulation results are given to verify the effectiveness and superiority of the theoretical finding.
In the structure of the title complex, [Cu(C(8)H(4)O(4))(C(12)H(8)N(2))(H(2)O)]·CH(4)O, the Cu(II) ion is penta-coordinated in a tetra-gonal-pyramidal geometry, with two O atoms of the 3-formyl-2-oxidobenzoate (3-formyl-salicylate) anion and two N atoms of 1,10-phenanthroline occupying the basal plane, and a water O atom located at the apical site. The structure displays O-H⋯O hydrogen bonding.
16 February 2026 in IEEE Transactions on Power Electronics
Contemporary resonant DC-link inverter (RDCLI) designs predominantly maintain soft-switching operation exclusively during unidirectional power flow from the DC source to the load. However, under reverse power transfer conditions where energy flows from the load back to the DC bus, the auxiliary circuits fail to enable zero-voltage or zero-current switching for the main power devices. This limitation results in conventional hard-switching operation during regenerative modes, consequently compromising the system's overall energy recovery efficiency. This paper proposes a novel RDCLI incorporating two structurally symmetrical auxiliary resonant circuits at the DC interface. These complementary circuits operate alternately according to the direction of power flow, enabling consistent soft-switching performance during bidirectional energy transfer. Furthermore, in the event of an open-circuit fault within either auxiliary set, the inverter maintains soft-switching capability along one power flow direction while experiencing performance degradation only in the opposite direction. This fault-tolerant characteristic prevents complete loss of soft-switching functionality across both power transfer directions during auxiliary device failures. This work presents a systematic analysis of the auxiliary network's operational mechanisms under bidirectional power flow conditions, coupled with the development of a complete parametric design framework. Experimental results verify that the auxiliary circuit maintains all theoretically derived operating modes during both power flow directions, with all semiconductor devices successfully achieving soft-switching transitions throughout the operational range. The measured peak efficiencies of 98.1% in forward operation and 96.7% in reverse operation at rated power establish the distinct advantage of the proposed bidirectional architecture over conventional unidirectional soft-switching alternatives. These findings validate the topology's considerable potential to advance the performance envelope and practical implementation of resonant DC-link solutions in high-frequency bidirectional power conversion systems.