14 August 2017 in Journal of Applied Physics
Temperature dependent diffuse reflectance spectroscopy measurements were carried out on polycrystalline samples of BaTiO3 across the tetragonal to cubic structural phase transition temperature (TP). The values of various optical parameters such as band gap (Eg), Urbach energy (Eu), and Urbach focus (E0) were estimated in the temperature range of 300 K to 480 K. It was observed that with increasing temperature, Eg decreases and shows a sharp anomaly at TP. First principle studies were employed in order to understand the observed change in Eg due to the structural phase transition. Near TP, there exist two values of E0, suggesting the presence of electronic heterogeneity. Further, near TP, Eu shows metastability, i.e., the value of Eu at temperature T is not constant but is a function of time (t). Interestingly, it is observed that the ratio of Eu (t=0)/Eu (t = tm), almost remains constant at 300 K (pure tetragonal phase) and at 450 K (pure cubic phase), whereas this ratio decreases close to the transition temperature, which confirms the presence of electronic metastability in the pure BaTiO3. The time dependence of Eu, which also shows an influence of the observed metastability can be fitted with the stretched exponential function, suggesting the presence of a dynamic heterogeneous electronic disorder in the sample across TP. First principle studies suggest that the observed phase coexistence may be due to a very small difference between the total cohesive energy of the tetragonal and the cubic structure of BaTiO3. The present work implies that the optical studies may be a sensitive probe of disorder/heterogeneity in the sample.
18 November 2021 in ACS Omega
The variation of dielectric constant (εr) in the low-frequency region (∼106 Hz) in Hf-substituted BaTiO3 has been modelled considering the electronic disorder in the form of Urbach energy (EU) with the help of a Bohr-like model. Optical absorption spectroscopy has been employed in order to estimate EU and also the band gap (Eg), which are found to scale systematically with Hf incorporation, whereas dielectric measurements reveal a decrease in the value of εr observed in the frequency range up to 106 Hz with Hf substitution in these prepared samples. The model predicts EU ∝ 1/εr2 and Eg ∝ 1/εr2, which agrees with the variation of the corresponding experimental values. Thus, the present work contributes to understanding the interconnection between the optical and dielectric properties of such materials and successfully demonstrates the decrease in dielectric constant with increasing disorder.
1 November 2018 in Materials Science in Semiconductor Processing
2 February 2018 in ACS Applied Energy Materials
4 January 2019 in ACS Applied Electronic Materials
11 January 2018 in Discover Nano
Glucose sensing properties of mesoporous well-aligned, dense nickel oxide (NiO) nanostructures (NSs) in nanopetals (NPs) shape grown hydrothermally on the FTO-coated glass substrate has been demonstrated. The structural study based investigations of NiO-NPs has been carried out by X-ray diffraction (XRD), electron and atomic force microscopies, energy dispersive X-ray (EDX), and X-ray photospectroscopy (XPS). Brunauer–Emmett–Teller (BET) measurements, employed for surface analysis, suggest NiO’s suitability for surface activity based glucose sensing applications. The glucose sensor, which immobilized glucose on NiO-NPs@FTO electrode, shows detection of wide range of glucose concentrations with good linearity and high sensitivity of 3.9 μA/μM/cm2 at 0.5 V operating potential. Detection limit of as low as 1 μΜ and a fast response time of less than 1 s was observed. The glucose sensor electrode possesses good anti-interference ability, stability, repeatability & reproducibility and shows inert behavior toward ascorbic acid (AA), uric acid (UA) and dopamine acid (DA) making it a perfect non-enzymatic glucose sensor.