3 April 2020 in Physical Review Applied
High-quality micro- and nanomechanical resonators are widely used in sensing, communications, and timing, and have future applications in quantum technologies and fundamental studies of quantum physics. Crystalline thin films are particularly attractive for such resonators due to their prospects for high quality, high intrinsic stress, high yield strength, and low dissipation. However, when such films are grown on a silicon substrate, interfacial defects arising from lattice mismatch with the substrate have been postulated to introduce additional dissipation. Here, we develop a back-side etching process for single-crystal silicon carbide microresonators that allows us to quantitatively verify this prediction. By engineering the geometry of the resonators and removing the defective interfacial layer, we achieve quality factors exceeding a million in silicon carbide trampoline resonators at room temperature, a factor of five higher than those achieved without removal of the interfacial defect layer. We predict that similar devices fabricated from ultrahigh-purity silicon carbide, leveraging its high yield strength, could enable room-temperature quality factors as high as .
17 January 2023 in Optics Express
ALAlejandra López-Vázquez
MMMario González Maldonado
+13
Nowadays, atom-based quantum sensors are leaving the laboratory towards field applications requiring compact and robust laser systems. Here we describe the realization of a compact laser system for atomic gravimetry. Starting with a single diode laser operating at 780 nm and adding only one fiber electro-optical modulator, one acousto-optical modulator and one laser amplifier we produce laser beams at all the frequencies required for a Rb-87 atomic gravimeter. Furthermore, we demonstrate that an atomic fountain configuration can also be implemented with our laser system. The modulated system reported here represents a substantial advance in the simplification of the laser source for transportable atom-based quantum sensors that can be adapted to other sensors such as atomic clocks, accelerometers, gyroscopes or magnetometers with minor modifications.
15 April 2013 in Journal of the Optical Society of America B
We present a dual isotope magneto-optical trap produced using a single diode laser. We generate all the optical frequencies needed for trapping both species using a fiber intensity modulator. All the optical frequencies are amplified simultaneously using a tapered amplifier. The independent control of each frequency is on the RF side rather than on the optical side. This introduces an enormous simplification for laser-cooling applications that often require an acousto-optic modulator for each laser beam. Frequency-changing capabilities are limited by the modulator bandwidth (10 GHz). Traps for more isotopes can be simply added by including additional RF frequencies on the modulator.
1 January 2012 in Review of Scientific Instruments
We present a laser configuration capable of fast frequency changes with a high power output and a large tuning range. The system integrates frequency tuning with an acousto-optic modulator with a double pass tapered amplifier. A compensation circuit keeps the seed power constant and prevents damage to the amplifier. A single mode fiber decouples the modulation and amplification sections and keeps the alignment fixed. The small power required to saturate the amplifier makes the system very reliable. We use the system to obtain a dipole trap that we image using a beam derived from the same configuration.
1 September 2016 in Physica Status Solidi (a)
29 June 2021 in OSA Continuum
The laser beam waist has an impact both in the sensitivity and systematic effects present in gravimetry and atom interferometry in general. In this paper we consider how different effects contribute to both aspects in order to make a better selection of the radius of the Raman beam given a particular laser power available. A large beam waist reduces systematic effects coming from wavefront curvature and Gouy phase contributions and improves the fringe contrast due to reduced intensity gradients. On the other hand, a large waist gives a smaller Rabi frequency, which lowers the sensitivity by reducing the fraction of atoms in the selected velocity range. Considering all contributions, we find that systematic effects usually have a dominant role in selecting a beam waist.