25 April 2018 in Nature Communications
Polymers are widely used in daily life, but exhibit low strength and low thermal conductivity as compared to most structural materials. In this work, we develop crystalline polymer nanofibers that exhibit a superb combination of ultra-high strength (11 GPa) and thermal conductivity, exceeding any existing soft materials. Specifically, we demonstrate unique low-dimensionality phonon physics for thermal transport in the nanofibers by measuring their thermal conductivity in a broad temperature range from 20 to 320 K, where the thermal conductivity increases with increasing temperature following an unusual ~T1 trend below 100 K and eventually peaks around 130–150 K reaching a metal-like value of 90 W m−1 K−1, and then decays as 1/T. The polymer nanofibers are purely electrically insulating and bio-compatible. Combined with their remarkable lightweight-thermal-mechanical concurrent functionality, unique applications in electronics and biology emerge.
17 June 2019 in IEEE Transactions on Components, Packaging and Manufacturing Technology
CNChristopher D. Nordquist
23 January 2020 in Journal of Applied Physics
Self-heating in AlGaN/GaN high electron mobility transistors (HEMTs) negatively impacts device performance and reliability. Under nominal operating conditions, a hot-spot in the device channel develops under the drain side corner of the gate due to a concentration of volumetric heat generation leading to nonequilibrium carrier interactions and non-Fourier heat conduction. These subcontinuum effects obscure identification of the most salient processes impacting heating. In response, we examine self-heating in GaN-on-Si HEMTs via measurements of channel temperature using above-bandgap UV thermoreflectance imaging in combination with fully coupled electrothermal modeling. The methods together highlight the interplay of heat concentration and subcontinuum thermal transport showing that channel temperature cannot be determined solely by continuum scale heat transfer principles. Under conditions of equal power dissipation (PDISS = VDS × IDS = 250 mW), for example, a higher VDS bias (∼23 V) resulted in an ∼44% larger rise in peak junction temperature compared to that for a lower VDS (∼7.5 V) condition. The difference arises primarily due to reduction in the heat generating volume when operating under partially pinched-off (i.e., high VDS) conditions. Self-heating amplifies with this reduction as heating now takes place primarily over length scales less than the mean free path of the phonons tasked with energy dissipation. Being less efficient, the subcontinuum transport restricts thermal transport away from the device hot-spot causing a net increase in channel temperature. Taken together, even purely thermally driven device mean-time-to-failure is not, therefore, based on power dissipation alone as both bias dependence and subcontinuum thermal transport influence device lifetime.
22 June 2021 in IEEE Transactions on Components, Packaging and Manufacturing Technology
GaN radio frequency (RF) power amplifiers offer many benefits including high power density, reduced device footprint, high operating voltage, and excellent gain and power-added efficiency. Accordingly, these parts are enabling next-generation technologies such as fifth-generation (5G) base transceiver stations and defense/aerospace applications such as high-performance radar and communication systems. However, these benefits can be overshadowed by device overheating that compromises the performance and reliability. In response to this, researchers have focused on GaN-on-diamond integration during the past decade. However, manufacturability, scalability, and long-term reliability remain as critical challenges toward the commercialization of the novel device platform. In this work, a diamond-incorporated flip-chip integration scheme is proposed that takes advantage of existing semiconductor device processing and growth techniques. Using an experimentally validated GaN-on-SiC multifinger device model, the theoretical limit of the cooling effectiveness of the device-level thermal management solution has been evaluated. Simulation results show that by employing a ~ 2-μm diamond passivation overlayer, gold thermal bumps, and a commercial polycrystalline carrier wafer, the power amplifier's dissipated heat can be effectively routed toward the package, which leads to a junction-to-package thermal resistance lower than GaN-on-diamond high electron mobility transistors (HEMTs). Furthermore, simulation results show that this approach is even more promising for lowering the device thermal resistance of emerging ultra-wide bandgap devices based on β-Ga 2 O 3 and AlGaN, below that for today's state-of-the-art GaN-on-diamond HEMTs.
1 November 2018 in Review of Scientific Instruments
The higher critical electric field of β-gallium oxide (Ga2O3) gives promise to the development of next generation power electronic devices with improved size, weight, power, and efficiency over current state-of-the-art wide bandgap devices based on 4H-silicon carbide (SiC) and gallium nitride (GaN). However, it is expected that Ga2O3 devices will encounter serious thermal issues due to the poor thermal conductivity of the material. In this work, self-heating in Ga2O3 Schottky barrier diodes under different regimes of the diode operation was investigated using diverse optical thermography techniques including thermoreflectance thermal imaging, micro-Raman thermography, and infrared thermal microscopy. 3D coupled electro-thermal modeling was used to validate experimental results and to understand the mechanism of heat generation for the diode structures. Measured top-side and cross-sectional temperature fields suggest that device and circuit engineers should account for the concentrated heat generation that occurs near the anode/Ga2O3 interface and/or the lightly doped drift layer under both forward and high voltage reverse bias conditions. Results of this study suggest that electro-thermal co-design techniques and top-side thermal management solutions are necessary to exploit the full potential of the Ga2O3 material system.
12 February 2018 in Applied Physics Letters
In this study, various thermal characterization techniques and multi-physics modeling were applied to understand the thermal characteristics of GaN vertical and quasi-vertical power diodes. Optical thermography techniques typically used for lateral GaN device temperature assessment including infrared thermography, thermoreflectance thermal imaging, and Raman thermometry were applied to GaN p-i-n diodes to determine if each technique is capable of providing insight into the thermal characteristics of vertical devices. Of these techniques, thermoreflectance thermal imaging and nanoparticle assisted Raman thermometry proved to yield accurate results and are the preferred methods of thermal characterization of vertical GaN diodes. Along with this, steady state and transient thermoreflectance measurements were performed on vertical and quasi-vertical GaN p-i-n diodes employing GaN and Sapphire substrates, respectively. Electro-thermal modeling was performed to validate measurement results and to demonstrate the effect of current crowding on the thermal response of quasi-vertical diodes. In terms of mitigating the self-heating effect, both the steady state and transient measurements demonstrated the superiority of the tested GaN-on-GaN vertical diode compared to the tested GaN-on-Sapphire quasi-vertical structure.