Zhe Zhao

Zhe Zhao

Auto-generated profile, based on publicly available information

Zhe Zhao

Jilin University (JLU) - State Key Laboratory of Automotive Simulation and Control

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Journal of Cleaner Production
Verified
Journal Article
Closed access
ZZZhe Zhao
Zhe Zhao
XYXiumin Yu
Xiumin Yu
YHYan Huang
Yan Huang
WSWeibo Shi
Weibo Shi
ZGZezhou Guo
Zezhou Guo
YLYinan Li
Yinan Li

20 September 2021 in ACS Omega
Verified
Journal Article
Open access
DLDecheng Li
Decheng Li
XYXiumin Yu
Xiumin Yu
PSPing Sun
Ping Sun
YDYaodong Du
Yaodong Du
MXMingjia Xu
Mingjia Xu
ZZZhe Zhao
Zhe Zhao
Ethanol is usually combined with gasoline to manufacture ethanol–gasoline with excellent combustion characteristics. However, extracting water from hydrous ethanol to manufacture anhydrous ethanol consumed much energy, which increases the production cost of ethanol–gasoline. Many researchers have studied the combustion and emissions of hydrous ethanol–gasoline to explore the application of hydrous ethanol–gasoline as the fuel for spark-ignition engines. Most previous studies changed the hydrous ethanol ratio with fixed purity in hydrous ethanol–gasoline to study the effects of hydrous ethanol. Different from previous studies, this paper studied the effects of water ratio (Wr) in hydrous ethanol on the combustion and emissions of a hydrous ethanol/gasoline combined injection engine under different excess air ratio (λ) values. The ratios of ethanol and gasoline keep constant, while the purity of hydrous ethanol changes during the research. The experiment adopted the combined injection mode with hydrous ethanol direct injection plus gasoline port injection; the direct injection ratio was 20%. The experiment set three λ (0.9, 1, and 1.2) and five Wrs (0, 5, 10, 15, and 20%). The test engine’s speed was 1500 rpm, and the intake manifold absolute pressure was 48 kPa. Results showed that water inhibited combustion, prolonged CA 0-10 and CA 10-90, reduced Pmax and Tmax, and delayed APmax; larger λ made the deterioration on combustion more obvious, and the smaller λ had a larger tolerance to water. Water could increase torque and improve emissions, but different parameters corresponded to different optimal Wrs. For torque, the optimal Wr was 5%. For HC emissions, the optimal Wr was 0%; for CO emissions, the optimal value was 5%; and for NOx emissions, the best value was 20%. The best Wr was 10% for particle number (PN) emissions. Under the optimal Wr condition, when λ values were 0.9, 1, and 1.2, compared with pure gasoline, the torque increased by 7.5, 5.54, and 5.31%; HC emissions decreased by 21.37, 23.43, and 26.58%; NOx emissions decreased by 4.26, 11.47, and 12.55%; CO emissions decreased by 17.51, 34.56, −50%; and the total PN emissions decreased by 87.64, 89.64, and 76.07%.

30 December 2023 in Energy
Verified
Journal Article
Closed access
WSWeibo Shi
Weibo Shi
ZLZihang Li
Zihang Li
ZZZhe Zhao
Zhe Zhao
XYXiumin Yu
Xiumin Yu
PSPing Sun
Ping Sun
MLMing Li
Ming Li


17 September 2025 in Energy
Verified
Journal Article
Closed access
WSWeibo Shi
Weibo Shi
ZLZihang Li
Zihang Li
ZZZhe Zhao
Zhe Zhao
YLYu Liu
Yu Liu
MLMing Li
Ming Li
YGYonglu Geng
Yonglu Geng

1 January 2022 in SSRN Electronic Journal
Verified
Preprint
Open access
PDF file
XYXiumin Yu
Xiumin Yu
TWTianqi Wang
Tianqi Wang
YDYaodong Du
Yaodong Du
ZGZezhou Guo
Zezhou Guo
ZZZhe Zhao
Zhe Zhao
TGTianyang Gong
Tianyang Gong
N-butanol, as a biological alternative fuel containing oxygen, has similar physical and chemical properties to gasoline, and has a wide range of sources, which has attracted more and more attention and research. Direct injection technology has been widely used in the field of internal combustion engine due to its advantages of flexibility and control ability. In this paper, the secondary injection of n-butanol engine under the mode of in-cylinder direct injection is discussed to organize the stratified combustion of the mixture, optimize the combustion to improve the thermal efficiency and reduce the emission. A 4-cylinder four-stroke spark ignition(SI) engine was selected to carry out the secondary injection experiment of n-butanol under the excess air ratio(λ) of 1, engine speed of 1500r/min, and low load, and the variables were the second injection ratio and timing. The results show that the secondary injection of n-butanol can achieve stratified combustion of the mixture, but only at a specific second injection timing such as 100°CA BTDC or 125°CA BTDC the combustion effect is the best, small second injection ratio can optimize combustion, improve BTE, reduce HC and CO emissions. When the second injection ratio is greater than 60%, it results in incomplete fuel combustion, a 3% to 4% reduction in thermal efficiency and an increase in emissions. Coefficient of variations(COV) was increased by secondary injection, but the effect was insignificant in small injection ratio, and it will increase with the increase of second injection ratio.