The catalytic performance of metallic catalysts derived from layered double hydroxide (LDH) precursors with nickel or cobalt incorporated in the brucite-like layers besides aluminium (i.e., NiAl takovite and related CoAl) was investigated for the first time in the chemoselective hydrogenation of cinnamaldehyde. The precursors in the as-synthesized and calcined forms were thoroughly analysed by ICP, XRD, nitrogen physisorption, DR UV-vis spectroscopy, TPR and in situ XRD after temperature-programmed reduction. According to the XRD results, both as-synthesized samples contained purely LDH phases with degrees of crystallization depending on the nature of incorporated metal cations (i.e., the CoAl sample presents larger crystallites than the NiAl takovite-like sample). For the calcined NiAl and CoAl samples, well-crystallized oxide phases of NiO and Co3O4, respectively, besides amorphous alumina and corresponding spinels were evidenced by XRD. The TPR and in situ XRD results for the calcined samples indicated strong metal–alumina interactions, which resulted in depressed sintering of evolved metal nanoparticles in the high-temperature range of 600–800 °C, in well agreement with TEM analysis. Materials derived from the studied LDH systems are found to be efficient catalysts for the hydrogenation of cinnamaldehyde, showing enhanced control over the activity or selectivity, depending on the nature of active metals and the thermal regime of the catalyst activation.
CuNi nanoparticles were effectively confined in the mesopores of SBA-15 silica by a simple incipient wetness impregnation method. After impregnation, the samples were dried at room temperature, which is considered as the key preparation step to obtain high and stable dispersions of the supported CuNi nanoparticles, irrespective of the thermal conditions during the calcination and reduction steps. The catalysts were systematically characterized by powder X-ray diffraction at low and high angles, transmission electron microscopy and nitrogen physisorption, hydrogen temperature-programmed reduction, in situXRD after temperature-programmed reduction, hydrogen chemisorption as well as by catalytic tests for the hydrogenation of cinnamaldehyde in liquid phase. Characterization revealed a strong interaction between Cu and Ni, resulting in improved reducibility as compared to either Cu or Ni monometallic materials. Moreover, the complete interdiffusion of Cu and Ni atoms to form continuous solid alloy solutions is prevented due to the stabilization of Ni by 1 : 1 nickel phyllosilicate. As a result, the bimetallic CuNi/SBA-15 materials present two distinct metallic phases, one rich in copper and another rich in nickel. At the calcination temperature of 500 °C, the materials displayed the highest chemisorption capacity and highest catalytic activity, as well. Nevertheless, the chemoselectivity of supported CuNi/SBA-15 to cinnamyl alcohol or hydrocinnamaldehyde does not depend on the calcination conditions.
1 November 2012 in Microporous and Mesoporous Materials