12 November 2012 in Energy & Fuels
24 July 2013 in Energy & Fuels
12 March 2014 in Science China Technological Sciences
20 September 2016 in Numerical Heat Transfer, Part A: Applications
When a cryogenic fluid initially at a subcritical temperature is injected into a supercritical environment, it will experience a process across a pseudo-boiling point, at which the specific heat reaches its maximum value under the corresponding pressure. Large eddy simulation (LES) is conducted to explore the effects of pseudo-vaporization phenomenon around the pseudo-critical temperature on fluid jet evolution. To highlight the pseudo-vaporization effect, a cryogenic nitrogen jet with different injection temperatures, which correspond to transcritical and supercritical conditions, respectively, is injected into a chamber with same supercritical conditions. All of the thermophysical and transport properties are determined directly from fundamental theories combined with a real fluid equation of state. It is found that when the fluid transits through the pseudo-boiling point, the constant-pressure specific heat reaches a local maximum, while the thermal conductivity and viscosity become minimum. The condition-averaged constant-pressure specific heat suggests that the pseudo-boiling point has the effect of increasing the density gradients. Vorticity and Q-criterion analysis reveals that high-temperature injection facilitates the mixing of jet fluid with ambient gas. Also, the high-temperature injection of supercritical fluid can earlier transit into the full developed region.
15 February 2019 in Journal of Engineering for Gas Turbines and Power
In order to study the in-cylinder flow characteristics, one hundred consecutive cycles of velocity flow fields were investigated numerically by large eddy simulation, and the proper orthogonal decomposition (POD) algorithm was used to decompose the results. The computed flow fields were divided into four reconstructed parts, namely mean part, coherent part, transition part, and turbulent part. Then, the dynamic mode decomposition (DMD) algorithm was used to analyze the characteristics of the reconstructed fields. The results show that DMD method is capable of finding the dominant frequencies in every reconstructed flow part and identifying the flow structures at equilibrium state. In addition, the DMD results also reveal that the reconstructed parts are related to each other through the break-up and attenuation process of unstable flow structures, while the flow energy cascade occurs among these parts through different scale vortex generation and dissipation process.
1 August 2011 in Acta Mechanica Sinica