14 May 2021 in Nature Communications
Tin perovskites have emerged as promising alternatives to toxic lead perovskites in next-generation photovoltaics, but their poor environmental stability remains an obstacle towards more competitive performances. Therefore, a full understanding of their decomposition processes is needed to address these stability issues. Herein, we elucidate the degradation mechanism of 2D/3D tin perovskite films based on (PEA)0.2(FA)0.8SnI3(where PEA is phenylethylammonium and FA is formamidinium). We show that SnI4, a product of the oxygen-induced degradation of tin perovskite, quickly evolves into iodine via the combined action of moisture and oxygen. We identify iodine as a highly aggressive species that can further oxidise the perovskite to more SnI4, establishing a cyclic degradation mechanism. Perovskite stability is then observed to strongly depend on the hole transport layer chosen as the substrate, which is exploited to tackle film degradation. These key insights will enable the future design and optimisation of stable tin-based perovskite optoelectronics.
23 June 2021 in Advanced Functional Materials
Over the past decade, perovskite solar cells (PSCs) have quickly established themselves as a promising technology boasting both high efficiency and low processing costs. The rapid development and success of PSCs is a product of substantial research effort addressing compositional engineering, thin film fabrication, surface passivation, and interfacial treatments. Recently, engineering of device architecture has entered a renaissance with the emergence of several new bulk and graded heterojunction structures. These structures promote a lateral approach to the development of single‐junction PSCs affording new opportunities in light management, defect passivation, carrier extraction, and long‐term stability. Following a short overview of the historic evolution of PSC architectures, a detailed discussion of the promising progress of the recently reported perovskite bulk heterojunction and graded heterojunction approaches are offered. To enable better understanding of these novel architectures, a range of approaches to characterizing the architectures are presented. Finally, an outlook and perspective are provided offering insights into the future development of PSC architecture engineering.
20 May 2022 in Advanced Energy Materials
Over the last decade, 2,2″,7,7″‐Tetrakis[N,N‐di(4‐methoxyphenyl)amino]‐9,9′‐spirobifluorene (spiro‐OMeTAD) has remained the hole transporting layer (HTL) of choice for producing high efficiency perovskite solar cells (PSCs). However, PSCs incorporating spiro‐OMeTAD suffer significantly from dopant induced instability and non‐ideal band alignments. Herein, a new approach is presented for tackling these issues using the functionality of organometallocenes to bind to Li+ dopant ions, rendering them immobile and reducing their impact on the degradation of PSCs. Consequently, significant improvements are observed in device stability under elevated temperature and humidity, conditions in which ion migration occurs most readily. Remarkably, PSCs prepared with ferrocene retain 70% of the initial power conversion efficiency (PCE) after a period of 1250 h as compared to only 8% in the control. Synergistically, it is also identified that ferrocene improves the hole extraction yield at the HTL interface and reduces interfacial recombination enabling PCEs to reach 23.45%. This work offers a pathway for producing highly efficient spiro‐OMeTAD devices with conventional dopants via addressing the key challenge of dopant induced instability in leading PSCs.
1 December 2020 in Nano Energy
KJK. D. G. Imalka Jayawardena
K. D. G. Imalka Jayawardena
+13
21 December 2022 in Angewandte Chemie International Edition
Tin halide perovskites (Sn HaPs) are the top lead‐free choice for perovskite optoelectronics, but the oxidation of perovskite Sn2+ to Sn4+ remains a key challenge. However, the role of inconspicuous chemical processes remains underexplored. Specifically, the halide component in Sn HaPs (typically iodide) has been shown to play a key role in dictating device performance and stability due to its high reactivity. Here we describe the impact of native halide chemistry on Sn HaPs. Specifically, molecular halogen formation in Sn HaPs and its influence on degradation is reviewed, emphasising the benefits of iodide substitution for improving stability. Next, the ecological impact of halide products of Sn HaP degradation and its mitigation are considered. The development of visible Sn HaP emitters via halide tuning is also summarised. Lastly, halide defect management and interfacial engineering for Sn HaP devices are discussed. These insights will inspire efficient and robust Sn HaP optoelectronics.
14 November 2024 in Energy & Environmental Science
Managing iodine formation is crucial for realising efficient and stable perovskite photovoltaics. Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is a widely adopted hole transport material, particularly for perovskite solar cells (PSCs). However, Improving the performance and stability of PEDOT:PSS based perovskite optoelectronics remains a key challenge. We show that amine-containing organic cations de-dope PEDOT:PSS, causing performance loss, which is partially recovered with thiocyanate additives. However, this comes at the expense of device stability due to cyanogen formation from thiocyanate-iodine interaction which is accelerated in the presence of moisture. To mitigate this degradation pathway, we incorporate an iodine reductant in lead-tin PSCs. The resulting devices show an improved power conversion efficiency of 23.2% which is among the highest reported for lead-tin PSCs, and ~66% enhancement for the TS80 lifetime under maximum power point tracking in ambient conditions. These findings offer insights for designing next-generation hole extraction materials for more efficient and stable PSCs.