30 August 2022 in IEEE Transactions on Electromagnetic Compatibility
Appropriate shielding methods can reduce the lightning induced voltage and current of cables. In this article, different lightning surge currents (8/20 and 5/320 μ s) are coupled to the tested multi-core cable with single shielding layer and double shielding layers. The shielding effectiveness (SE) on the lightning surge current is compared for different cable shielding methods. The experimental results show that the cable induced current is effectively reduced when the shielding layer, the shielding spare core wire or the metal tube are grounded at two ends. A better shielding effect for the cable with double shielding layers is achieved by grounding both ends of the outer shielding layer and one end of the inner shielding layer, reducing the induced current to about 5% when the shielding layer is not grounded. Moreover, the SE of the spare core wire, used as the shielding wire in the multi-core cable, is better than that of the external shielding wire of the cable. The SE of the metal tube increases more and more slowly with the increase of the tube coverage percentage. Furthermore, the descending order of the SE of shielding methods involved here are grounding both ends of double shielding layers, grounding both ends of single shielding layer, spare core wire shielding and metal tube shielding. Finally, some engineering recommendations are proposed through the comparison between the shielding methods in this article and relevant works.
24 November 2022 in IET Science, Measurement & Technology
A simulation model composed of an interfering cable and a disturbed cable is established for studying the lightning inductive characteristics between parallel cables. Effects of the horizontal distance between cables (5–40 cm), their height difference (−6–32 cm), as well as the length of disturbed cable (1–100 m) are investigated for the cable induced voltage, which is measured at the resistive load connected between one terminal of the disturbed cable and the ground, when various lightning surge currents (8/20 μs, 5/320 μs, and 0.5 μs/100 kHz) are delivered into the interfering cable. Our findings show that an increase of horizontal distance between cables can give rise to an exponential decrease of the cable induced voltage, and that there exist linear correlations between either the height difference of two cables or the length of disturbed cable and the cable induced voltage, which reaches maximum when the cables are located at the same height and of equal length. Verification experiments for the effect of horizontal distance have also been made, and, in general, they all show a reasonable agreement with the simulations. A detailed theoretical explanation of obtained findings is provided as well.
1 January 2013 in The Proceedings of The Computational Mechanics Conference
3次元領域におけるPoisson問題とHelmholtz問題に対して,オーバーレンジ選点法とオーバーレンジ選点なしの選点法との比較解析を行い,オーバーレンジ選点法の計算精度の向上を確認した.