18 November 2019 in IEEE Access
In this investigation, a convex-shaped fiber ring (CSFR)-based single-longitudinal-mode (SLM) erbium-doped fiber laser (EDFL) is proposed and experimentally verified. The CSFR, composed of only two optical couplers and forming a double-ring architecture, is employed to serve as a high quality mode filter to eliminate the dense longitudinal modes of the EDFL. The unpumped erbium-doped fiber in the Sagnac loop is utilized to produce the ultra-narrowband auto-tracking filter effect as a saturable absorber to guarantee the SLM out. The experimental results show that the linewidth of the proposed EDFL is 840 Hz with a high optical signal to noise ratio of 63 dB. In addition, the stability of the EDFL with the maximum output power fluctuation of 0.01 dB and the maximum central wavelength variation of 0.01 nm, in both the short-term and the long-term observations. Hence, we obtained a SLM EDFL with extremely high stability, ultra-narrow linewidth and high optical signal to noise ratio (OSNR).
16 February 2021 in Optics Express
Herein, we verify that a Raman/EDFA hybrid amplifier can improve the stability of fiber-optic time and frequency synchronization systems compared to the Er3+-doped fiber amplifier (EDFA), owing to its higher gain and lower noise figure (NF) performance. We studied the variation law of Raman gain efficiency for a fiber Raman amplifier (FRA) as a function of pump power and input signal power, designed a bidirectional Raman/EDFA hybrid amplifier, and proved that equivalent NF below 0 dB can be obtained. Finally, hybrid amplifiers were compared to EDFAs in a free-running frequency synchronization system. The transfer stabilities reached 1.9678 × 10−13/1sand 2.0248 × 10−13/1swhen FRA + EDFA and EDFA + FRA configurations were used, respectively, both exhibiting better performance than the stability of 3.0905 × 10−13/1 sobtained by EDFA.
1 January 2025 in Optical Engineering
A machine learning method designing flat broadband erbium-doped fiber amplifier (EDFA) + Raman hybrid amplifier was demonstrated. First, we trained a neural network (NN) using data consisting of Raman amplifier pump parameters and gains arranged in descending, ascending, and random order. This trained NN is utilized to calculate pump parameters based on the target gain of the hybrid amplifier. Then, the gain accuracy is optimized through the application of fitting equations that establish a relationship between the adjustment power of Raman’s pump and the gain ratio of the EDFA/Raman amplifier. The optimized results show that when using descending datasets, the error of output power is minimized, with means of root-mean-square-error and maximum error of 0.24 and 0.54 mW, respectively. Its average flatness is not significantly different from the results obtained using ascending and randomly arranged training data. Second, we divided the training data into five parts according to gain ratio of EDFA and Raman amplifier. The accuracy deteriorates when training the NN with a portion of the data, but the accuracy could be enhanced by repeatedly training the NN with the same data. Our results contribute to the construction of intelligent fiber optic transmission networks.