1 December 2004 in Physics of Fluids
A series of experiments is presented which demonstrate significant drag reduction for the laminar flow of water through microchannels using hydrophobic surfaces with well-defined micron-sized surface roughness. These ultrahydrophobic surfaces are fabricated from silicon wafers using photolithography and are designed to incorporate precise patterns of microposts and microridges which are made hydrophobic through a chemical reaction with an organosilane. An experimental flow cell is used to measure the pressure drop as a function of the flow rate for a series of microchannel geometries and ultrahydrophobic surface designs. Pressure drop reductions up to 40% and apparent slip lengths larger than are obtained using ultrahydrophobic surfaces. No drag reduction is observed for smooth hydrophobic surfaces. A confocal surface metrology system was used to measure the deflection of an air–water interface that is formed between microposts and supported by surface tension. This shear-free interface reduces the flow resistance by allowing the fluid to contact only a very small effective area of the silicon surface. The impact of the surface topology on the drag reduction is explored in detail and the results are found to be in good qualitative agreement with the predictions of analytical theory.
1 September 1993 in Journal of Computational Physics
The fractional step method for solving the incompressible Navier-Stokes equations in primitive variables is analyzed as a block LU decomposition. In this formulation the issues involving boundary conditions for the intermediate velocity variables and the pressure are clearly resolved. In addition, it is shown that poor temporal accuracy (first-order) is not due to boundary conditions, but due to the method itself. A generalized block LU decomposition that overcomes this difficulty is presented, allowing arbitrarily high temporal order of accuracy. The generalized decomposition is shown to be useful for a wide range of problems including steady problems. Technical issues, such as stability and the appropriate pressure update scheme, are also addressed. Numerical simulations of the unsteady, incompressible Navier-Stokes equations in a square domain confirm the theoretical results.
1 March 2000 in Journal of Computational Physics
10 February 2009 in Journal of Fluid Mechanics
Direct numerical simulations (DNSs) are used to investigate the drag-reducing performance of superhydrophobic surfaces (SHSs) in turbulent channel flow. SHSs combine surface roughness with hydrophobicity and can, in some cases, support a shear-free air–water interface. Slip velocities, wall shear stresses and Reynolds stresses are considered for a variety of SHS microfeature geometry configurations at a friction Reynolds number of Reτ ≈ 180. For the largest microfeature spacing studied, an average slip velocity over 75% of the bulk velocity is obtained, and the wall shear stress reduction is found to be nearly 40%. The simulation results suggest that the mean velocity profile near the superhydrophobic wall continues to scale with the wall shear stress but is offset by a slip velocity that increases with increasing microfeature spacing.
25 July 1995 in Journal of Fluid Mechanics
Direct numerical simulation is used to examine the interaction of turbulence with a wall in the absence of mean shear. The influence of a solid wall on turbulence is analysed by first considering two ‘simpler’ types of boundaries. The first boundary is an idealized permeable wall. This boundary isolates and elucidates the viscous effects created by the wall. The second boundary is an idealized free surface. This boundary complements the first by allowing one to isolate and investigate the kinematic effects that occur near boundaries. The knowledge gained from these two simpler flows is then used to understand how turbulence is influenced by solid walls where both viscous and kinematic effects occur in combination. Examination of the instantaneous flow fields confirms the presence of previously hypothesized structures (splats), and reveals an additional class of structures (antisplats). Statistical analysis of the Reynolds stresses and Reynolds stress transport equations indicates the relative importance of dissipation, intercomponent energy transfer, and energy transport. It is found that it is not the structures themselves, but the imbalance between structures which leads to intercomponent energy transfer. Remarkably, this imbalance (and hence near-wall intercomponent energy transfer) is controlled by viscous processes such as dissipation and diffusion. The analysis presented herein is a departure from past notions of how boundaries influence turbulence. The efficacy of these qualitative physical concepts is demonstrated in Part 2 where improved near-wall turbulence models are derived based on these ideas.
1 June 2010 in Physics of Fluids
Superhydrophobic surfaces combine hydrophobic surface chemistry with topological microfeatures. These surfaces have been shown to provide drag reduction in laminar and turbulent flows. In this work, direct numerical simulation is used to investigate the drag reducing performance of superhydrophobic surfaces in turbulent channel flow. Slip velocities, wall shear stresses, and Reynolds stresses are determined for a variety of superhydrophobic surface microfeature geometry configurations at friction Reynolds numbers of , , and . This work provides evidence that superhydrophobic surfaces are capable of reducing drag in turbulent flow situations by manipulating the laminar sublayer. For the largest microfeature spacing, an average slip velocity over 80% of the bulk velocity is obtained, and the wall shear stress reduction is found to be greater than 50%. The simulation results suggest that the mean velocity profile near the superhydrophobic wall continues to scale with the wall shear stress and the log layer is still present, but both are offset by a slip velocity that is primarily dependent on the microfeature spacing.