School of Energy and Power Engineering, Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education, Dalian University of Technology, Dalian 116024, PR China
Auto-generated profile, based on publicly available information
Sufen Li
School of Energy and Power Engineering, Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education, Dalian University of Technology, Dalian 116024, PR China
In order to obtain a deeper understanding of the regenerative cooling process of scramjet engines, in this paper, a numerical investigation on the supercritical convective heat transfer of n-decane in horizontal circular tubes was conducted, based on a complete set of conservation equations and the Renormalization group (RNG) k–ε turbulence model with enhanced wall treatment. The present study mainly focuses on the heat transfer deterioration (HTD) phenomenon, including the mechanism and critical conditions for the onset of HTD. Moreover, the applicability of some conventional heat transfer empirical correlations was analyzed and compared, thus providing guidance for the Nusselt number predictions in the cooling channels. Results indicate that under the compositive conditions of low pressure and high heat flux, two types of HTD phenomena could occur when the wall and bulk fluid temperatures are near the pseudo-critical temperature, owing to the abnormal distributions of near-wall turbulent kinetic energy and radial velocity, respectively. Increasing the pressure would effectively alleviate and eliminate the HTD. A comparison of numerical results with those obtained with different empirical expressions shows that the Bae-Kim expression provides the best agreement, especially when HTD occurs. Furthermore, a new correction for critical heat flux of HTD has been successfully developed.
This paper presents the results of a comprehensive program of experiments in which fly ash particles were impacted under controlled conditions against a flat steel surface. The overall aim of these experiments was to gain an understanding of the ash deposition process in a pulverized coal boiler system. A continuous nitrogen flow carrying fly ash particles was used to examine the effect of particle incident velocity and particle diameter (dp) on the normal restitution coefficient, and of the particle diameter on the critical velocity. The effect of the incident normal velocity and particle diameter on the normal restitution coefficient was also examined. The results show that the normal restitution coefficient increases rapidly with increasing incident velocity when this incident velocity is less than the yield velocity, and rapidly decreases with increasing incident velocity when the incident velocity is greater than the yield velocity. The critical velocity, determined solely by the first-contact energy loss, is proportional to dp−5/6 and therefore becomes larger for smaller particles. For instance, in the present work, the velocity vc of a particle with diameter of 85 μm is 0.19 m/s, which increases to 0.42 m/s for particles with a diameter of 65 μm.