19 December 2018 in Materials Research Express
Pure metals Aluminum (Al) and Titanium (Ti) thin films have been deposited on steel by using physical vapor deposition. The effect of these protective layers on atmospheric corrosion steel surface have been investigated after exposure the samples for one year to urban atmosphere.The rust morphology observed using Scanning Electronic Microscope (SEM) analysis consists of a cotton ball structure for the steel samples coated with Al, and flowery structure for samples coated with Ti. The Raman spectroscopy (RS) used in this study consolidates deeply the information about the structure of the rust layer. The Al coating shows the predominance growth of iron oxide as goethite. However in case of uncoated steel or Ti coating, the oxide structure was principally lepidocrocite. Raman shifting to high wavenumber values gave stretching corresponding to diaspore. The comparison of Raman bands for the Ti coating on steel to the literature suggests that in our case the Ti films are not converted to a protective layer of anatase or rutile during exposure. This result can explain the important growth of the rust layer in atmosphere and suggest that Ti acting as a getter for atmospheric pollutant. However, the Al steel coating present an interesting resistant to atmospheric corrosion.
19 September 2026 in Journal of Applied Engineering Science and Technology
In recent years, there is a dire need for energy, and energy storage appears to be a cost-effective solution to meet these needs. Supercapacitors are the most widely used for this purpose. Materials based on polyaniline (PANI) are соmmоnly usеd in supеrсаpасitоrs due tо their impressivе prоpеrtiеs, such as significant specific capacitance, eхсеllent еleсtrоchemicаl perfоrmanсе, cost–effective оf synthеsis. Hоwever, a significаnt drаwbaсk оf PANI is its limitеd durability. Tо addrеss this issue, PANI is often combined PANI with various materials. In this study, we investigate supercapacitor’s electrode materials by combining PANI with various metal oxides such as ZrO2, ZnO2, TiO2 and MnO2. Herein we used X-Ray Diffraction (XRD) and Fourrier Transform Infrared spectroscopy (FTIR) to confirm PANI/Metal oxides composite synthesis. The electrochemical performance was conducted by cyclic voltammetry. The PANI/ZrO2 exhibited a specific capacity of 563.5 F/g the highest comparing to the other composites, which make it more suitable for supercapacitors application. On the other hand, PANI/TiO2 demonstrated lower conductivity, therefore it could not be selected to this application. Highlights Metal oxide were successfully combined with conducting polymers using simple and cost effective root. The combination of metal oxides with conducting polymers improve significantly the specific capacitance. The prepared composite electrode shows good electrochemical performance, making it highly suitable for supercapacitor applications.