13 July 2020 in IEEE Transactions on Electromagnetic Compatibility
Performance of electromagnetic interference (EMI) filters in power-electronics applications is limited by the parasitic coupling between the components of the filters and the self-parasitic of each component. While these parasitic effects can be partially taken into account on the circuit level, it is difficult to estimate their values. In this article, a full-wave modeling methodology is proposed to predict the performance of a complete EMI filter up to 1 GHz. Following the proposed methodology, the mutual couplings among the EMI filter components are taken into account as well as the self-parasitics of each individual component. Experiments and simulations are carried out to validate the modeling methodology. A self-parasitic cancellation technique is also applied to demonstrate the benefits of three-dimensional modeling methodology in EMI filter design.
22 June 2020 in IEEE Transactions on Electromagnetic Compatibility
In total radiated power (TRP) measurements, it is essential to eliminate the effects of electromagnetic interference caused by the ambient noise. The elimination is usually achieved by shielding. However, shielding may be insufficient, especially in reverberation tents. Under this condition, additional methods are needed to suppress the noise. Practical methods are proposed to suppress the effect of uncorrelated noise signals during the TRP measurement in the reverberation tents. The methods are validated for the cancelation of communication noise, including Wi-Fi, global system for mobile (GSM), and FM signals. If the noise reference signal is available, the noise contribution can be suppressed by ratio averaging. When the reference signal is hard to obtain, blind source separation allows separating the uncorrelated signals from the combination of the intended signal and noise. For intermittent signals, threshold cancelation is proposed.