1 August 2018 in IEEE Transactions on Geoscience and Remote Sensing
Polarization orientation angle (POA) is an important parameter of polarimetric radar scattering from slopes in mountainous region. It is known that surface tilted in azimuth direction and buildings not aligned in the along-track direction induce polarization orientation shifts. Earlier research has established orientation angle as a function of radar imaging geometry and surface slopes, and that POA estimation can be derived from polarimetric radar data using circular polarization. Besides these, polarimetric scattering from steep slopes and its relation to POA remain not well understood. In this paper, we address these issues by adopting a tilted surface model based on Bragg scattering. We have found that, as the azimuthal slope increases, |VV| decreases at a faster rate than |HH|, they become equal, when POA is ±45°, and |HH| >|VV| afterward. In other words, the Pauli component, |HH-VV| reduced to zero at POA = ± 45°, and the typical Bragg scattering characteristics of |VV| >|HH| does not apply when steep slope is present inducing |POA| > 45°. Furthermore, the cross-pol |HV| does not always increase with azimuth slope but also reaches a maximum then decreases to zero. In addition, we investigate the effect of soil moisture on polarimetric SAR (PolSAR) scattering characteristics of steep terrain and the effect of vegetation over surface on POA estimation. The latter is demonstrated with NASA/JPL TOPSAR L-band PolSAR data and C-band InSAR data. Another significance of this paper is that it provides a direct and rigorous derivation of POA equations. The earlier version was derived from a different concept.
3 June 2021 in IEEE Transactions on Geoscience and Remote Sensing
Model-based polarimetric decompositions are often used to generate scene classifications from polarimetric synthetic aperture radar (POLSAR) imagery. The classification quality largely depends on whether the adopted polarimetric scattering mechanisms match the major in-scene scattering mechanisms. However, in-scene scattering variations still cause potential mismatches, resulting in unphysical or inaccurate decomposition results. The robustness of model-based polarimetric decompositions remains a general concern. In this article, we address the robustness of model-based polarimetric decomposition to variations of the in-scene scattering mechanisms using simulated datasets. The known simulated scattering mechanisms provide the needed ``ground truth'' against which we quantitatively evaluate the robustness of polarimetric decompositions. Accurate retrieval of known scattering mechanisms from simulated polarimetric data led us to develop a robust model-based decomposition. We propose a new approach to solve model-based decomposition by employing an L₁-regularized optimization procedure, which automatically selects a set of optimal polarimetric scattering mechanisms and guarantees nonnegative powers for the selected scattering mechanisms. We illustrate this L₁ model decomposition by employing both simulated datasets and actual POLSAR imagery. Our new L₁-regularized approach to POLSAR model-based decomposition that mitigates observed biases seen in earlier decompositions provides robust scattering mechanism estimates and eliminates unphysical, negative scattering powers.
19 November 2019 in IEEE Geoscience and Remote Sensing Letters
The effectiveness of refined interferometric synthetic aperture radar (InSAR) filter (refined filter) was validated using both simulated and real interferometric data. However, the threshold as a key parameter in the refined filter is determined by repeated attempts, and the deterministic method has some disadvantages, such as strong subjectivity, long time consuming, and bad adaptation. This letter makes full use of the robustness of inverse distance weighting (IDW) to simplify the refined filter. In the proposed filter, using an 11 × 11 window and an improved IDW, the computational burden of I(e jψz )I for 16 windows per pixel is avoided, and the need for setting the threshold is eliminated. From the beginning, the initial window angle is determined using four preprocessing windows. The filtering direction of the center pixel is affected by the initial window angle of each pixel, the degree of homogeneity of each pixel, and the distance of the pixel from the center pixel in the 11 × 11 window. The improved weighting method is then used to further refine the window angle of the center pixel. Numerical experiments by simulated and real InSAR data were used to validate the proposed approach. By comparison, the proposed filter greatly improves the efficiency of the refined filter and exhibits the superiority in filtering performance compared to commonly used filters, particularly for regions of low coherence, high-coherence-gradient, and high-phase gradient.
6 August 2020 in IEEE Geoscience and Remote Sensing Letters
Polarimetric SAR (PolSAR) imagery offers an enhanced capability to reveal the salient scattering properties of scene content. PolSAR-based target decomposition has been widely used to show different apparent scattering mechanisms for various target classes, empowering a direct yet powerful technique for SAR imagery analysis. Among those common targets, modeling the random volume scattering from vegetation is one of the most important. Generally, one models vegetation as a cloud of randomly oriented thin cylinders, mainly intended for twigs and branches. At high radar frequencies, PolSAR imagery shows a strong response from leaves in the vegetation canopy. In this letter, we derive the polarimetric scattering theory for general random volume scatterers, including both thin cylinders and thin disks as limiting cases for leaf response. Adding the proposed random thin disk model explains the observed scattering difference between deciduous forest and coniferous forest, which we then incorporate into a new model-based PolSAR target decomposition scheme.
14 July 2022 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Estimation of polarization orientation angle (POA) is of general interest in polarimetric SAR (PolSAR) image processing because it is useful to remove the orientation-induced polarimetric distortion but also to infer physical target parameters. Under the assumption of scatter reflection symmetry, POA can be readily estimated from a circular polarization basis formulation or equivalently from zeroing the Pauli-basis correlation term ${{\boldsymbol{T}}}_{23}$ . This solution does not account for a possible presence of helical components; alternatively, we developed a general formulation for POA estimation using Touzi parameterization that explicitly contains a helical angle. When applied to PolSAR imagery of rough terrain surface, those two estimators generally give different results. Based on the POA derived from coregistered digital elevation model data, we find the former estimator can underestimate the POA for rough terrain surface. In this article, we further investigate the underlying cause. Although these two POA estimators differ in whether assuming zero helicity or not, the inherent helicity on the rough surface scattering is negligible; instead, the difference in the estimated POA is mainly attributed to the degree of mixing of a secondary scattering mechanism. This mixing impact can be significant even for rough terrain with only light vegetation cover, suggesting a practical need for inclusion of alternative estimators.