Chemical etching is widely applied to texture the surface of sputter‐deposited zinc oxide for light scattering in thin‐film silicon solar cells. Based on experimental findings from the literature and our own results we propose a model that explains the etching behavior of ZnO depending on the structural material properties and etching agent. All grain boundaries are prone to be etched to a certain threshold, that is defined by the deposition conditions and etching solution. Additionally, several approaches to modify the etching behavior through special preparation and etching steps are provided.
1 October 2008 in Zeitschrift für Physikalische Chemie
Scanning electrochemical microscopy (SECM) has developed into a very versatile tool for the investigation of solid-liquid, liquid-liquid and liquid-gas interfaces. The arrangement of an ultramicroelectrode (UME) in close proximity to the interface under study allows the application of a large variety of different experimental schemes. The most important have been named feedback mode, generation-collection mode, redox competition mode and direct mode. Quantitative descriptions are available for the UME signal, depending on different sample properties and experimental variables. Therefore, SECM has been established as an indispensible tool in many areas of fundamental electrochemical research. Currently, it also spreads as an important new method to solve more applied problems, in which inhomogeneous current distributions are typically observed on different length scales. Prominent examples include devices for electrochemical energy conversion such as fuel cells and batteries as well as localized corrosion phenomena. However, the direct local investigation of such systems is often impossible. Instead, suitable reaction schemes, sample environments, model samples and even new operation modes have to be introduced in order to obtain results that are relevant to the practical application. This review outlines and compares the theoretical basis of the different SECM working modes and reviews the application in the area of electrochemical energy conversion and localized corrosion with a special emphasis on the problems encountered when working with practical samples.