4 September 2023 in Journal of Non-Crystalline Solids
1 February 2021 in Materials Research Express
Glass forming ability (GFA) is one of the key factors hindering the application of bulk metallic glasses (BMGs). Microalloying has shown beneficial effects on GFA. However, the mechanism is still unclear. A new guidance via clusters was applied to understand and quickly choose beneficial microalloying elements for enhancing GFA which might help build a foundation for further quantitative analysis of minor alloying via clusters. Under the guidance, a series of beneficial microalloying elements could be quickly discovered, verified and understood. The results show that the beneficial microalloying elements for enhancing GFA should be chosen under the condition of bringing in new types of topologically efficiently packed clusters.
1 July 2022 in Materials Research Express
The effects of Nb-microalloying on glass forming ability, thermal properties and mechanical properties of (Zr0.6032Cu0.2256Fe0.0995Al0.0717)100-xNbx (x = 0, 1, 2, 3, 4) alloys were investigated. The best glass former was obtained for (Zr0.6032Cu0.2256Fe0.0995Al0.0717)97Nb3, which could be fabricated into full glass with diameter up to 6 mm at least. In addition, the origin of enhancing GFA of ZrAlFeCu amorphous alloy by means of the minor addition of Nb, Gd and Hf, was also discussed from the aspects of clusters and mixing entropy, which might provide a method of understanding the mechanism of enhancing glass-forming ability via microalloying, and choosing minor alloying element with an aim of enhancing glass-forming ability. It was found that the thermal stability reduced as the content of Nb increased along with the supercooled liquid region decreased. Nb-microalloying decease the fracture strength. However, moderate Nb microalloying could enhance the room temperature plastic strain.
1 April 2022 in Materials Research Express
Glass forming ability (GFA) is one of the key factors hindering the application of bulk metallic glasses (BMGs). In this paper, a cluster-related method was used to design good glass-formers in the complex Co-Fe-based system. A novel Co-centered Co-Mo binary topologically packed cluster Co-Co8Mo4 with 12-coordination number was found and used. The basic ternary composition in Co-Mo-B system is calculated based on an intersection of cluster lines B-B2Co8 and Co-Co8Mo4. Based on this, a series of novel Co-Fe-based glass-formers with high GFA, were quickly designed using the method of similar element replacement and microalloying. The best glass-former is (Co27.5Fe27.5Mo12.2Cr12.2B16P4.6)98Y2. The source of high GFA of designed glass-formers was also discussed. The results of this paper would offer researchers a novel insight in understanding the source of high GFA of Co/Fe-based system, and lay a solid foundation for exploring Co/Fe-Mo-based glass-formers via newly found Co-Mo binary cluster.
14 September 2026 in Journal of Non-Crystalline Solids
31 August 2026 in Materialia