24 November 2020 in IEEE Internet of Things Journal
Directional modulation (DM) is an important technology for physical layer security in wireless communications. Recently, a symbol-independent magnitude constraint for all antennas was proposed in DM design to reduce the design complexity of its analogue implementation. However, a limitation of the method is that it can only set the magnitude to a certain value, and all the antenna coefficients have the same magnitude. In this article, a more flexible solution is provided and the challenge of the design is the nonconvex constraint enforcing an arbitrary symbol-independent magnitude for all coefficients. To solve the problem, a convex iterative method is proposed, based on which the magnitudes of weight coefficients for all antennas can be chosen by designers in advance according to the specific requirements, allowing more freedom in the design process, which is the major difference between the previously proposed design and the newly proposed one. Two design examples are provided to demonstrate the effectiveness of the proposed design. One is is a general example, where coefficient magnitudes for different symbols are the same for the same antenna, but different for different antennas; the other one is a special case where magnitudes for all antennas are the same.
28 September 2020 in IEEE Access
Positional modulation (PM) has been introduced recently where a given modulation pattern can only be received at certain desired positions. To achieve it, the multi-path effect is exploited for positional modulation with the aid of metasurface acting as a low-cost flexible reflecting surface. In this paper, sparse antenna array based positional modulation design is proposed for the first time; to reduce the implementation complexity of the metasurface, the number of active units is also minimised for a given PM design requirement. Design examples are provided to show the effectiveness of the proposed design.
25 March 2019 in IEEE Access
In this paper, an intelligent health monitoring system based on body-centric wireless communications (BCWCs) is studied, and implantable antennas are investigated. To design antennas for an intelligent health monitoring system, the effects of the relative permittivity and conductivity of a human body equivalent liquid on an implantable antenna are investigated via electromagnetic analysis. Two types of capsule antennas, an isolated type capsule antenna and a surface type capsule antenna, are investigated and compared. An inner-layer implantable capsule dipole antenna with the characteristics of both a large effective electrical length and a small transmission loss is proposed. The methodology of the designed capsule antenna that obtains a maximum received power at 500 MHz by changing the internal impedance is also presented.
18 June 2020 in IEEE Access
Directional modulation (DM) can transmit information to the desired direction or directions with known constellation mappings, but with scrambled ones in other directions. However, one problem of the design is that when desired receivers and eavesdroppers are in the same transmission direction, their beam responses cannot be distinguished, as steering vectors for these locations are the same. To solve the problem, positional modulation (PM) is introduced where a given modulation pattern can only be received at certain desired positions. In this work, the multi-path effect is exploited for positional modulation with the aid of metasurface acting as a low-cost flexible reflecting surface. Design examples are provided to show the effectiveness of the proposed design.
24 October 2019 in IEEE Access
18 July 2019 in IEEE Access
Microstrip antenna has been designed and applied to many practical scenarios for wireless communications. To meet the increasing requirements of wireless communication and quality of service, array antenna design deserves studying and analyzing. A novel design of 2.45-GHz microstrip array antenna has been proposed in the paper. The novel array antenna is composed by a planar layout of elements, coaxial feeders and circular feed points. The array antenna is designed to satisfy practical requirements, including frequency channel, voltage standing wave ratio, impedance matching, and signal loss rate. A memetic of genetic algorithm and the quasi-Newton method is proposed to effectively solve the design model. Numerical simulations are performed by the five optimization methods and two array sizes. The results show that the proposed design is able to produce qualified microstrip array antenna for usage. The proposed memetic method is more effective than the other four methods. The microstrip array antenna will be useful for practical wireless communication systems.