1 September 2013 in Journal of Analytical and Applied Pyrolysis
WFWanignon-Ferdinand Fassinou
Wanignon-Ferdinand Fassinou
1 October 2016 in Applied Mathematical Modelling
16 March 2016 in Drying Technology
Sludge drying is an important intermediate process for sewage sludge treatment, usage, and disposal. A series of drying experiments were conducted in a continuous paddle dryer in order to have a better understanding of the sludge drying mechanism. The couple model of penetration model and Markov chain was used to simulate the drying kinetics in a continuous paddle dryer. The drying process has been compared in experimental and theoretical results, which show good agreement. The sewage sludge drying process in a continuous paddle dryer can be divided into three stages: the pasty phase, the sticky phase, and the complete-granular phase. The influences of the drying parameters on the sludge drying kinetics in a continuous paddle dryer were investigated. The sludge flow rate, dryer wall temperature, and dryer slope have remarkable influence on sludge drying in the examined range, but the stirrer speed and steam temperature have little influence on the drying kinetics.
1 February 2015 in Water Research
1 January 2017 in Powder Technology
1 December 2014 in Drying Technology
A model based on the theory of Markov chains has been developed to represent the residence time distribution (RTD) of municipal sewage sludge in a continuous paddle dryer. The flow of dry solids is described by a chain of n perfectly mixed cells, n corresponding to the number of paddles attached to the shaft. The transition probabilities between the cells are governed by two parameters: the parameter of internal recirculation, R, and the solids hold-up, Hu. In the absence of available correlation, both parameters are identified by fitting the model to experimental RTD data. The model demonstrates its ability to describe the sludge flow in a continuous lab-scale paddle dryer. A sensitivity analysis highlights that R is critical for the treatment uniformity while Hu controls the mean residence time and thus the final moisture content.