23 January 2025 in IEEE Transactions on Nuclear Science
Space-borne wireless communications systems have become ubiquitous with the advent of commercial space flight. To support robust wireless data transmission in Earth-orbiting and deep-space applications, a framework has been developed for radio-frequency (RF) designers and radiation-effects engineers to identify, model, visualize, and test single-event effects (SEEs) in wireless receivers. Digital RF communications receivers are introduced, including the constellation diagram, an important visualization tool. Then, the generation of single-event transients (SETs) is presented in multiple layers, starting from transistors, building to SETs at the outputs of each circuit block, and culminating in the response of the full receiver system. Circuit blocks addressed in this work include a low-noise amplifier (LNA), down-conversion mixer, and voltage-controlled oscillator (VCO). Analytical theory and numerical simulation are synthesized, accompanied with pulsed-laser SEE testing, to give an understanding of how deposited charge in constituent transistors convert to SETs and SEUs. As an example case, a SiGe-BiCMOS direct-conversion receiver carrying 100-Mbaud quadrature phase-shift keying (QPSK) at the X-band (8–12 GHz) is characterized using pulsed-laser SEE testing. This manuscript provides a useful review and analytical template that enable future designers and radiation-effects engineers to (a) model SET propagation in a wireless receiver a priori, without testing full systems, (b) identify the SEE mechanisms present in a wireless receiver with knowledge of the circuit components present, and (c) determine sensitive transistors and circuits to develop informed test plans for worst-case predictions.
18 December 2025 in IEEE Transactions on Nuclear Science
Voltage-controlled oscillators (VCOs) are key components in providing periodic signals that are used in RF communications systems for time synchronization and signal processing. However, standalone VCOs can have poor phase noise performance and experience frequency drift; therefore, injection locking can be implemented in a VCO to stabilize these performance metrics. Injection-locked VCOs (ILVCOs) in satellite communications or radar systems can be subject to total-ionizing dose (TID) effects, which could alter the performance of the oscillator. The present work analyzes the effects of TID in a 5 GHz ILVCO using an X-ray source, and demonstrates that the locking range increases and phase noise of the ILVCO improves with total dose. This unexpected result was analyzed using circuit simulations and shows that the negative threshold voltage shifts induced by TID may be posited to the increase of the ratio of injection signal current to oscillator signal current, which may ultimately extend the locking range. Consequently, the increase in the strength of the injection signal due to TID may also lead to the decrease of phase noise. These results suggest that the use of ILVCOs in satellite systems may be favorable as they are TID radiation tolerant compared to standalone oscillators.