20 March 2018 in Bioinspiration & Biomimetics
Birds are highly capable and maneuverable fliers, traits not currently shared with current small unmanned aerial vehicles. They are able to achieve these flight capabilities by adapting the shape of their wings during flight in a variety of complex manners. One feature of bird wings, the primary feathers, separate to form wingtip gaps at the distal end of the wing. This paper presents bio-inspired wingtip devices with varying wingtip gap sizes, defined as the chordwise distance between wingtip devices, for operation in low Reynolds number conditions of Re = 100 000, where many bird species operate. Lift and drag data was measured for planar and nonplanar wingtip devices with the total wingtip gap size ranging from 0% to 40% of the wing's mean chord. For a planar wing with a gap size of 20%, the mean coefficient of lift in the pre-stall region is increased by 7.25%, and the maximum coefficient of lift is increased by 5.6% compared to a configuration with no gaps. The nonplanar wingtip device was shown to reduce the induced drag. The effect of wingtip gap sizes is shown to be independent of the planarity/nonplanarity of the wingtip device, thereby allowing designers to decouple the wingtip parameters to tune the desired lift and drag produced.
26 May 2023 in Communications Engineering
Flow control is the attempt to favorably modify a flow field’s characteristics compared to how the flow would have developed naturally along the surface. Natural flyers and swimmers exploit flow control to maintain maneuverability and efficiency under different flight and environmental conditions. Here, we review flow control strategies in birds, insects, and aquatic animals, as well as the engineered systems inspired by them. We focus mainly on passive and local flow control devices which have utility for application in small uncrewed aerial and aquatic vehicles (sUAVs) with benefits such as simplicity and reduced power consumption. We also identify research gaps related to the physics of the biological flow control and opportunities for device development and implementation on engineered vehicles.
18 January 2021 in Proceedings of the National Academy of Sciences
Many small animals use springs and latches to overcome the mechanical power output limitations of their muscles. Click beetles use springs and latches to bend their bodies at the thoracic hinge and then unbend extremely quickly, resulting in a clicking motion. When unconstrained, this quick clicking motion results in a jump. While the jumping motion has been studied in depth, the physical mechanisms enabling fast unbending have not. Here, we first identify and quantify the phases of the clicking motion: latching, loading, and energy release. We detail the motion kinematics and investigate the governing dynamics (forces) of the energy release. We use high-speed synchrotron X-ray imaging to observe and analyze the motion of the hinge’s internal structures of four Elater abruptus specimens. We show evidence that soft cuticle in the hinge contributes to the spring mechanism through rapid recoil. Using spectral analysis and nonlinear system identification, we determine the equation of motion and model the beetle as a nonlinear single-degree-of-freedom oscillator. Quadratic damping and snap-through buckling are identified to be the dominant damping and elastic forces, respectively, driving the angular position during the energy release phase. The methods used in this study provide experimental and analytical guidelines for the analysis of extreme motion, starting from motion observation to identifying the forces causing the movement. The tools demonstrated here can be applied to other organisms to enhance our understanding of the energy storage and release strategies small animals use to achieve extreme accelerations repeatedly. Significance Click beetles are among animals that amplify mechanical power output using springs and latches to perform ultrafast movements. Studies involving these animals have been limited to observing the kinematics of the movements. Here, we study the kinematics and dynamics of the extremely fast bending maneuver performed by click beetles (i.e., the clicking motion). First, we identify the latching, loading, and release phases of the clicking motion using high-speed synchrotron X-ray imaging. Second, we discover a portion of the spring mechanism that the beetles use to store and quickly release energy. Finally, using specialized analytical methods, we characterize the damping and elastic forces that govern the release phase, which explains why the beetles can rapidly perform this click without significant damage.
31 August 2012 in Smart Materials and Structures
1 January 2019 in Journal of Experimental Biology
Elaterid beetles have evolved to “click” their bodies in a unique maneuver. When this maneuver is initiated from a stationary position on a solid substrate, it results in a jump not carried out by the traditional means of jointed appendages (i.e. legs). Elaterid beetles belong to a group of organisms that amplify muscle power through morphology to produce extremely fast movements. Elaterids achieve power amplifications through a hinge situated in the thoracic region. The actuating components of the hinge are a peg and mesosternal lip, two conformal parts that latch to keep the body in a brace position until their release, the “click,” that is the fast launch maneuver. While prior studies have identified this mechanism, they were focused on the ballistics of the launched body or limited to a single species. In this work, we identify specific morphological details of the hinges of four click beetle species, namely Alaus oculatus (L.), Paralellosthetus attenuatus (Say), Lacon discoideus (Weber) and Melanotus spp. (Eschscholtz), which vary in overall length from 11.3 to 38.8 mm. The measurements from Environmental Scanning Electron Microscopy (ESEM) and Computerized Tomography (CT) were combined to provide comparative structural information on both exterior and interior features of the peg and mesosternal lip. Specifically, ESEM and CT reveal the morphology of the peg, which is modeled as an Euler-Bernoulli beam. In the model, the externally applied force is estimated using a micromechanical experiment. The equivalent stiffness, defined as the ratio between the applied force and the peg tip deflection is estimated for all 4 species. The estimated peg tip deformation indicates that, under the applied forces, the peg is able to maintain the braced position of the hinge. This work comprehensively describes the critical function of the hinge anatomy through an integration of specific anatomical architecture and engineering mechanics for the first time.
17 June 2014 in Journal of Mechanisms and Robotics
A contact-aided compliant mechanism (CCM) called a compliant spine (CS) is presented in this paper. It is flexible when bending in one direction and stiff when bending in the opposite direction, giving it a nonlinear bending stiffness. The fundamental element of this mechanism is a compliant joint (CJ), which consists of a compliant hinge (CH) and contact surfaces. The design of the compliant joint and the number of compliant joints in a compliant spine determine its stiffness. This paper presents the design and optimization of such a compliant spine. A multi-objective optimization problem with three objectives is formulated in order to perform the design optimization of the compliant spine. The goal of the optimization is to minimize the peak stress and mass while maximizing the deflection, subject to geometric and other constraints. Flapping wing unmanned air vehicles, also known as ornithopters, are used as a case study in this paper to test the accuracy of the design optimization procedure and to prove the efficacy of the compliant spine design. The optimal compliant spine designs obtained from the optimization procedure are fabricated, integrated into the ornithopter's wing leading edge spar, and flight tested. Results from the flight tests prove the ability of the compliant spine to produce an asymmetry in the ornithopter's wing kinematics during the up and down strokes.