1 March 2019 in Physics of Fluids
This paper describes the first high-order accurate, fully compressible, multiphase model to simulate the expansion and collapse of a near-wall cavitation bubble in a low-frequency ultrasound field. The model captures the compressibility of the fluids, subsequent shocks, and a physically correct representation of the acoustic input through an immersed moving boundary that represents the active face of the ultrasound transducer face. The model’s predictions of bubble dynamics are compared to existing models that are able to capture the collapse of a near wall bubble, (1) the Rayleigh growth and collapse model and (2) the Rayleigh-Plesset growth initialized collapse model, highlighting the limitations of the previously developed models.
1 February 2023 in Computers & Fluids
15 November 2021 in Physical Review Fluids
Transcritical shock-droplet interactions (TSDIs) occur in a spectrum of high-speed propulsion systems involving liquid fuel injection. “Transcritical” behavior refers to a condition at which the combustion chamber pressure nears the critical pressure of the fuel-air mixture and, by increasing the temperature, a transition from liquidlike to gaslike state is observed. Our understanding of TSDI is significantly less developed than its gas-phase (ideal-gas or supercritical) or liquid-phase (subcritical) counterparts, which are referred to as shock-bubble interactions (SBIs) and shock-droplet interactions (SDIs), respectively. In this paper, we investigate the interaction of a shockwave with an n-dodecane droplet at supercritical pressures. A fully conservative diffuse-interface framework coupled with the Peng-Robinson equation of state is developed to accurately determine the state of the fluid and the resulting interfacial instabilities as the shock propagates through the droplet. The influence of varying the initial temperature of the fuel, the ambient pressure, and the shockwave strength on the shock structure and the droplet morphological deformation is delineated. The dynamics of the TSDI cases are then compared to the subcritical SDI and supercritical or ideal-gas SBI counterparts. It is shown that, depending on the preshock temperature and pressure, the TSDIs exhibit some common features observed in classical cases of SDIs and SBIs, bridging the gap between the sub- and supercritical problems.
29 September 2023 in International Journal of Heat and Mass Transfer
1 March 2022 in Computers & Fluids
25 November 2024 in Journal of Fluid Mechanics
Aerodynamic breakup of vaporizing drops is commonly seen in many spray applications. While it is well known that vaporization can modulate interfacial instabilities, the impact of vaporization on drop aerobreakup is poorly understood. Detailed interface-resolved simulations were performed to systematically study the effect of vaporization, characterized by the Stefan number, on the drop breakup and acceleration for different Weber numbers and density ratios. It is observed that the resulting asymmetric vaporization rates and strengths of Stefan flow on the windward and leeward sides of the drop hinder bag development and prevent drop breakup. The critical Weber number thus generally increases with the Stefan number. The modulation of the boundary layer also contributes to a significant increase of drag coefficient. Numerical experiments were performed to affirm that the drop volume reduction plays a negligible role and the Stefan flow is the dominant reason for the breakup suppression and drag enhancement observed.