15 September 2025 in Journal of Computational Design and Engineering
Magnetic soft continuum robots (MSCRs) exhibit significant potential for applications in complex and constrained environments, such as minimally invasive surgical interventions and catheter navigation, owing to their unique advantages of remote actuation, high compliance, and adaptability. However, accurately describing the physical evolution mechanism of MSCR transitioning from small to large deformations is challenging due to the nonlinear behaviours caused by magneto-mechanical coupling effects and large deformations. To address this challenge, this paper proposes a State-Dependent Switching Physics-Informed Neural Network (SDS-PINN) for achieving high-precision Prediction of the nonlinear deformation of MSCR across the whole deflection domain (0$^{\circ }180^{\circ }$). This method is based on constructing multiphysics coupling models for small and large deformation stages. It dynamically adjusts physical constraints using a state-dependent switching (SDS) mechanism, enabling adaptive switching and continuous modelling between different deformation modes. The effectiveness of the proposed SDS-PINN approach is validated through numerical simulations and comparative experimental studies. Results show that SDS-PINN outperforms traditional PINN in different deformation modes, with a reduction in free-end displacement Prediction error by over 99% in large deformation scenarios. This study proposes a unified and physically interpretable framework for the deformation modelling and control of MSCRs, which significantly enhances prediction accuracy and stability under complex working conditions.
24 January 2025 in Robotics and Autonomous Systems
4 March 2026 in IEEE Transactions on Automation Science and Engineering
Aiming at the problems such as insufficient driving force, body oscillation, and contact instability that easily occur when wheel-based wall-climbing robots operate on discontinuous wall surfaces (such as corners and obstacles), this paper proposes an adaptive control strategy integrating joint impedance control and fuzzy decoupling compensation for a Five-Wheel Wall-Climbing robot(FWWC-robot). This strategy optimizes impedance parameters (mass, damping, and stiffness) online through an adaptive parameter update mechanism based on force error to minimize magnetic gap fluctuations and ensure stable adsorption. Meanwhile, a Mamdani fuzzy controller is used to dynamically compensate for the coupling interference of the front and rear swing arms, realizing real-time adjustment of joint compliance and improving the robot’s motion stability and dynamic adaptability when encountering abrupt changes in wall structures. Simulation and experimental results show that, compared with the traditional impedance control, this method reduces the attitude error by 60%, controls the magnetic gap fluctuation within 0.3 mm, achieves a 100% success rate of obstacle crossing under the working conditions of 63° corner and 30 mm obstacle, and keeps the attitude stability within ±1.2°. It provides an efficient and robust solution for the compliant motion of robots in complex wall environments, and can directly support the automated applications in high-risk operation scenarios such as ship derusting and large oil tank inspection.