10 March 2021 in Geophysics
Accurate removal of surface-related multiples remains a challenge in shallow-water cases. One reason is that the success of surface-related multiple estimation (SRME)-related algorithms is sensitive to the quality of the near-offset reconstruction. When it comes to a larger missing gap and a shallower water bottom, the state-of-the-art near-offset gap construction method — the parabolic Radon transform — fails to provide reliable recovery of the shallow reflections due to the limited information from the data and highly curved events at near offsets with strong lateral amplitude variations. Therefore, we have developed a novel workflow that first deploys a deep-learning-based reconstruction of the shallow reflections and then uses the reconstructed data as the input for the subsequent surface multiple removal. In particular, we use a convolutional neural network architecture — U-net that was developed from convolutional autoencoders with extra direct skip connections between different levels of encoders and the corresponding decoders. Instead of using field data directly in network training, the training set is carefully synthesized based on the prior water-layer information of the field data; thus, a fully sampled field data set, which is difficult to obtain, is not needed for training in our workflow. An inversion-based approach — closed-loop SRME — is used for the surface multiple removal, in which the primaries are directly estimated via full-waveform inversion in a data-driven manner. Finally, the effectiveness of our workflow is determined based on 2D North Sea field data in a shallow-water scenario (92.5 m water depth) with a relatively large minimum offset (150 m).
3 May 2021 in IEEE Transactions on Geoscience and Remote Sensing
Three upcoming Martian missions will deploy a ground-penetrating radar (GPR) to reveal the fine-resolution subsurface structure and dielectric properties of materials beneath the surface. Numerical forward simulations of radar echo using a model of the near-surface structure at the landing site can provide a valuable reference for processing and interpretation of future radar data collected on Mars. In this study, based on the geological information of the Jezero crater, a detailed stratigraphic model of the near-surface structure is derived, which includes several key features, for example, the randomness of the medium, terrain, and cracks. To identify correctly the reflections of subsurface interfaces and fractures from the radar image, a $v(z$ ) f-k migration is carried out, the performance of which is evaluated using the GPR data obtained near Antarctic Zhongshan Station since the electrical properties of Antarctic glaciers and Martian materials are to some extent comparable. The results in this work show that compared with common migration algorithm, the $v(z$ ) f-k method not only improves the clarity of radar image but also provides the permittivity profiles to infer the composition of the substrate, leading to a better understanding of Martian near-surface geology.
15 June 2021 in Geophysics
DVDirk Jacob (Eric) Verschuur
Dirk Jacob (Eric) Verschuur
Reliably separating primary and multiple reflections in a shallow-water environment (i.e., 50–200 m water depth) still remains a challenge. The success of previously published closed-loop s...
16 December 2020 in Geophysics
An important imaging challenge is creating reliable seismic images without internal multiple crosstalk, especially in cases with strong overburden reflectivity. Several data-driven methods have been proposed to attenuate the internal multiple crosstalk, for which fully sampled data in the source and receiver side are usually required. To overcome this acquisition constraint, model-driven full-wavefield migration (FWM) can automatically include internal multiples and only needs dense sampling in either the source or receiver side. In addition, FWM can correct for transmission effects at the reflecting interfaces. Although FWM has been shown to work effectively in compensating for transmission effects and suppressing internal multiple crosstalk compared to conventional least-squares primary wavefield migration (PWM), it tends to generate relatively weaker internal multiples during modeling. Therefore, some leaked internal multiple crosstalk can still be observed in the FWM image, which tends to blend in the background and can be misinterpreted as real geology. Thus, we adopted a novel framework using local primary-and-multiple orthogonalization (LPMO) on the FWM image as a postprocessing step for leaked internal multiple crosstalk estimation and attenuation. Due to their opposite correlation with the FWM image, a positive-only LPMO weight can be used to estimate the leaked internal multiple crosstalk, whereas a negative-only LPMO weight indicates the transmission effects that need to be retained. Application to North Sea field data validates the performance of the proposed framework for removing the weak but misleading leaked internal multiple crosstalk in the FWM image. Therefore, with this new framework, FWM can provide a reliable solution to the long-standing issue of imaging primaries and internal multiples automatically, with proper primary restoration.
1 July 2013 in Chinese Physics B
The water temperature has a strong effect on the kinematic viscosity, which is inversely proportional to the phonon lifetime and the gain coefficient. The higher the temperature is, the smaller the kinematic viscosity is, and the larger the phonon lifetime is. At a low pump power and a short focal length, we can derive a single-peak stimulated Brillouin scattering (SBS) pulse. The duration of this single-peak SBS pulse depends mainly on the phonon lifetime of water. With the increase of the water temperature, the duration of such a single-peak SBS pulse will become longer, and the SBS energy will become higher for the gain coefficient, which is related to the phonon lifetime. Therefore, varying the medium temperature can lead to the changes of SBS pulse duration and SBS energy