11 May 2024 in Measurement
2 September 2025 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Ti 2 AlNb intermetallic is a crucial material for advanced aero engines. Improper cutting parameters for milling Ti 2 AlNb intermetallic increase tool wear and reduce tool life. Therefore, predicting tool wear and selecting appropriate cutting parameters in milling is essential. In this paper, three tool wear prediction methods based on the nonlinear least squares regression algorithm, Gaussian process regression algorithm, and support vector regression algorithm are proposed. Among the three methods, the nonlinear least squares regression method achieves the highest prediction accuracy. This paper also presents a cutting parameter selection strategy based on the Non-dominated Sorting Genetic Algorithm II. The optimization goals are to maximize cutter life, maximize material removal rate, and minimize cutting force. The optimization results reveal the relationship between cutter life, material removal rate, and cutting force under certain cutting parameters. Seventeen sets of suitable cutting parameters are identified for the 6 mm diameter end mill, and five sets are identified for the 8 mm diameter end mill, considering conditions of cutter life, material removal rate, and cutting force.
22 February 2026 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
The machining of aviation thin-walled parts has always been a difficult task due to their high machining accuracy requirements. During the machining process of thin-walled parts, machining errors are inevitable, reducing the precision and quality of the components. Therefore, predicting machining errors is beneficial for optimizing process parameters, improving accuracy, and reducing costs. This paper proposes a thin-walled parts machining errors prediction method based on the kriging regression model considering uncertainties. The method establishes a surrogate model considering process parameter uncertainty, part uncertainty, model uncertainty, and unquantified uncertainty. The experimental data were extracted through processing experiments, combined with a Bayesian estimation algorithm to ascertain the model parameter, and combined with a gradient descent method to iteratively solve the uncertainty in the model to determine the optimal parameters of the model. The result of the experiment shows that the prediction model has a higher accuracy in the training parameter range and also in the extrapolation test set, and the root mean square error (RMSE) of the prediction model is 5.4238 μm.