The share of inverter-connected renewable energy resources (RESs) is increasing in the grid, with these resources partially displacing conventional synchronous generators. This has resulted in increased variability of active power supply, reduced overall inertia, and increased spatial heterogeneity of inertia, leading to faster system frequency dynamics along with larger and more frequent frequency control events. These effects are expected to become increasingly more important in power system control in next-generation grids, which may conceivably be made up entirely of RESs. To mitigate these challenges, a fast, area-based hierarchical control strategy is proposed. This scheme partitions the power system into small areas, estimates local power imbalances, and corrects them by utilizing local inverter-based resources (IBRs). In cases where sufficient resources are not available locally, power is preferentially sourced from electrically close neighbours using an iterative distributed optimization scheme which preserves information privacy between areas. The proposed frequency control architecture can be retrofit onto existing control systems, and allows for flexibility in the amount of model information available to the designer. The control strategy is validated on two detailed multi-area power system models. Simulation results show that the strategy provides fast and localized frequency control.
16 December 2020 in IEEE Transactions on Power Systems
The increasing integration of utility-scale renewable energy sources (RESs) brings emerging challenges to the classical problems of voltage control in transmission grids, including increased potential for voltage violations. To address this challenge, we present a novel measurement-based coordinated voltage control scheme that can enable fast participation of RESs. In this approach, RESs are coordinated with the traditional voltage control devices such as synchronous generators (SGs) and static var compensators (SVCs) to maintain all bus voltages within operational limits while respecting device power limits. The control scheme allows different priorities to be assigned to different control resources, and ensures that both voltage and reactive power constraints are met in steady-state whenever it is possible to do so. The controller design requires only an approximate model of the steady-state relationships between voltage and reactive power in the system, and in online operation, processes voltage and reactive power measurements to produce set-point updates for RESs, SVCs, and SGs; this feedback provides robustness against both model uncertainty and unmeasured disturbances. The feasibility and effectiveness of the controller is demonstrated via simulation case studies on a detailed power system model.
29 November 2023 in IEEE Transactions on Power Systems
To address the control challenges associated with the increasing share of inverter-connected renewable energy resources, this paper proposes a direct data-driven approach for fast frequency control in the bulk power system. The proposed control scheme partitions the power system into control areas, and leverages local dispatchable inverter-based resources to rapidly mitigate local power imbalances upon events. The controller design is based directly on historical measurement sequences, and does not require identification of a parametric power system model. Theoretical results are provided to support the approach. Simulation studies on a nonlinear three-area test system demonstrate that the controller provides fast and localized frequency control under several types of contingencies.
7 November 2022 in IEEE Transactions on Power Systems
In Tang et al. (2021) a measurement-based coordinated voltage controller for transmission systems was developed. As essential model information, the controller incorporates linear sensitivities between device set-points and voltages/power injections in the grid. This letter details how online sensitivity estimation using robust least squares can be used in place of model-based sensitivities, leading to a model-free voltage control approach.