1 May 2008 in IEICE Transactions on Information and Systems
This paper will propose a wolf attack probability (WAP) as a new measure for evaluating security of biometric authentication systems. The wolf attack is an attempt to impersonate a victim by feeding “wolves” into the system to be attacked. The “wolf” means an input value which can be falsely accepted as a match with multiple templates. WAP is defined as a maximum success probability of the wolf attack with one wolf sample. In this paper, we give a rigorous definition of the new security measure which gives strength estimation of an individual biometric authentication system against impersonation attacks. We show that if one reestimates using our WAP measure, a typical fingerprint algorithm turns out to be much weaker than theoretically estimated by Ratha et al. Moreover, we apply the wolf attack to a finger-vein-pattern based algorithm. Surprisingly, we show that there exists an extremely strong wolf which falsely matches all templates for any threshold value.
1 January 2023 in Journal of Japan Society of Civil Engineers, Ser. E1 (Pavement Engineering)
供用中のアスファルトコンクリート(アスコン)層は,酸化や紫外線等により劣化している.このようなアスコンの疲労ダメージ状態を評価するには,実舗装から採取した切取コアの供試体を用いた疲労試験を行う必要がある.本研究では,実舗装から採取した切取コア供試体と室内で作製した熱劣化アスコン供試体に対して繰返し圧縮引張試験を行い,結果として得られる各種の粘弾性パラメータと疲労破壊回数の関係について検討した.その結果,アスコンの疲労ダメージの蓄積状態は繰返し載荷過程における位相角の変化と密接な関係があり,粘弾性パラメータとして単位位相角変化量を導入することで,疲労ダメージの蓄積のし易さを評価できることがわかった.
16 September 2022 in Journal of Testing and Evaluation
A study was conducted to ascertain the changes in viscoelastic parameters with the increase in fatigue damage of asphalt mixtures. In the present study, it was ascertained how the viscoelastic parameters changed with the increase in the fatigue damage of asphalt mixtures by conducting the repeat compressive-tensile test using cylindrical specimens compacted using the Superpave Gyratory Compactor. The viscoelastic parameters, including dissipated energy and phase angle, were affected by the strain amplitude, test temperature, and penetration value. The relationship assessment between the viscoelastic parameters and the number of cycles to failure reveals that the fatigue characteristics are influenced by the dissipated energy accumulation and the phase angle changes in the fatigue process. The number of cycles to failure of the asphalt mixture was correlated with the total dissipated energy accumulated until fatigue failure and the change in phase angle in the fatigue process. The fatigue damage of asphalt mixture increased significantly when the asphalt mixture exhibited viscoelasticity and the unit dissipated energy reached its maximum value. The repeated compressive-tensile test can assess the viscoelastic parameters of the cylindrical core samples obtained from the field in both their fatigue damage state and the asphaltic concrete layer’s remaining life.
1 February 2021 in IOP Conference Series: Materials Science and Engineering
The stripping is one of serious distresses because it causes the decline in the bearing capacity of the asphalt pavement. As the result of evaluation of the bearing capacity of the pavement by FWD, the dissipation amount of work becomes larger at the stripping area in comparison with non-stripping area. An anti-stripping agent is effective for preventing such stripping in advance. The new anti-stripping agent which used in this research forms the strong electrochemical bonding between the asphalt and the aggregate by giving bipolarity to the asphalt. Furthermore, it is clarified that the new anti-stripping agent can give improve and enhance the shear strength of the asphalt as well. The shear strength is closely related to the rutting and the fretting of the asphalt pavement in accordance with past research. Therefore, enhancing the shear strength should contribute to not only the improvement in the rutting and the fretting but also the prevention of the strip-ravelling that the fine aggregates and the asphalt mortar are washed out from the pavement surface and it often takes place in Malaysia and Asian countries. In this research, we will focus on the strip-ravelling of the asphalt pavement, and simulate the strip-ravelling by using an immersed-wearing tester. As a result, this research clarifies the relationship between the shear strength of the asphalt and the strip-ravelling of the asphalt mixture.