23 June 2020 in ACS Applied Materials & Interfaces
1 October 2015 in Microelectronics Journal
25 June 2020 in IEEE Sensors Journal
In this work, a resistive sensor based on multiwalled carbon nanotube (MWCNT) - poly(diallyldimethylammonium chloride) solution (PDDA) composite is proposed for highly sensitive carbon monoxide (CO) detection at room temperature. The surface of MWCNTs is functionalized with PDDA, and the functionalization is investigated by Fourier transform infrared and Raman spectroscopy. The MWCNT-PDDA composite is used as a sensing material with deposited interdigitated electrodes (IDE) of silver (Ag) on glass substrates. The resistance of the sensors changes due to charge transfer from CO to the positively charged quaternary ammonium group present on PDDA. The developed sensors are able to detect very low concentrations of CO gas ranging from 1 to 20 ppm with high sensitivity and limit of detection (LOD) of 127 ppb. The interference of other gases and volatile organic compounds is investigated, and the results are presented. The influence of humidity and temperature on the sensors is also explored. The stability and repeatability of the sensors are examined, and the sensors are almost stable for 2 months with excellent reproducibility. The sensors also follow the Langmuir adsorption/desorption model. The sensors have shown excellent potential for rapid CO gas sensing, and it can be used in wearable electronics applications.
11 November 2019 in IEEE Sensors Journal
A paper based chemiresistor has been fabricated to selectively sense ethanol in human breath. The chemiresistor was composed of a sensing mixture of multiwall-carbon-nano-tubes (MWCNTs), poly (diallyl-dimethyl-ammonium chloride) (PDDA), alcohol dehydrogenase (ADH), and coenzyme (NADH). The aluminum electrode was deposited on the paper surface, followed by drop-casting of the aforementioned sensing mixture. The resistance of the sensors was measured by exposing the same in gas-vapor mixture as well as the sample solution. The surface-modified MWCNTs specifically broke down ethanol present in the gas-vapor mixture or in a solution to generate a quantitative electronic response proportional to the ethanol concentration. Subsequently, the interference of other volatile organic materials was also tested to prove the selectivity and sensitivity of the sensor towards ethanol in the presence of different volatile organic compounds (VOCs). The variation of the resistance during the interaction between sensor and ethanol was also characterized by measuring the surface potential of the channel material under ethanol exposure using Kelvin probe force microscopy (KPFM). The sensor was integrated with a voltage divider circuit, a display, and a microcontroller unit to make a proof-of-concept prototype for the point-of-care (POC) detection of ethanol in human breath.
4 January 2024 in Optical Materials
10 September 2024 in Journal of Physics and Chemistry of Solids