1 November 2024 in Canadian Journal of Civil Engineering
Based on existing experimental data and analysis, seven different fiber-reinforced polymer (FRP) bar models including carbon fiber-reinforced polymer (CFRP), basalt fiber-reinforced polymer (BFRP), aramid fiber-reinforced polymer (AFRP), glass fiber-reinforced polymer (GFRP), GFRP and CFRP combined (G–C), GFRP and AFRP combined (G–A), BFRP and CFRP combined (B–C), and BFRP and AFRP combined (B–A) were established. Finite element simulation analysis was conducted on seven different FRP bar combinations under static load bending tests. The flexural behavior of the specimens reinforced with different FRP bar combinations and their influencing factors were analyzed. The results showed that using AFRP as the reinforcement material for FRP composite bars in FRP reinforced concrete beams cannot effectively enhance the overall load-carrying capacity of the composite bars. The combination of CFRP with GFRP and BFRP bars significantly increases the stiffness of the FRP bar structure and improves the structural load-carrying capacity of the concrete beams.
1 January 2020 in Latin American Journal of Solids and Structures
This paper investigated the fatigue properties and theoretical research on Carbon-Fiber-Reinforced Polymer (CFRP) RC bridge roof with new deck-pavement material. Two deck pavement schemes of CFRP-reinforced specimens were designed and tested. Four-point flexural fatigue tests were carried out on the specimens. The fatigue crack propagation, the deflection development and the CFRP strain under bridge fatigue load were researched. The test results show that the CFRP plate-reinforced specimens crack resistance performance can be improved and can bear the fatigue test load of two million times. Combined with the characteristics of the crack growth rate and fatigue damage accumulation of CFRP plate-reinforced bridge roof specimens, the fatigue life prediction analytical model for CFRP plate reinforced RC bridge roof was obtained. The fatigue life prediction model agrees well with the experimental results. The model proposed in this paper could be applied to predict the fatigue life of the CFRP plate-reinforced RC bridge roofs.
1 January 2021 in IOP Conference Series: Earth and Environmental Science
In response to the requirement of national thermal power flexibility reform policy and the need of regional central heating development, a 350MW supercritical unit in a power plant has been transformed with zero output technology of low pressure cylinder. In this paper, the scope and content of low pressure cylinder zero output transformation are discussed, peak shaving and heating capacity after transformation are analyzed, the difference between operation effect and calculation result after unit transformation is compared by test, and the matters needing attention in future operation are given, which provides reference for technical transformation of low pressure cylinder zero output of other power plant units.
1 January 2019 in Latin American Journal of Solids and Structures
The bond-slip relationship of Carbon Fiber Reinforced Polymer (CFRP) plate-concrete after the influence of high temperature action of Stone Mastic Asphalt (SMA) paving was investigated in this article. Two groups of double shear specimens with different bonding length were designed and tested. Based on the test results, the failure modes of specimens, the strain distribution and the shear stress of CFRP-concrete interface were analyzed. Considering the influence of high temperature, the interfacial bond-slip constitutive model of CFRP plate and concrete after high temperature action of SMA paving construction was proposed. The proposed model can reflect the nonlinearity and interface softening behaviour of the CFRP plate-concrete interface constitutive relationship under special environment. Through the comparative study of exixting constitutive models, the interface bond-slip constitutive model proposed in this paper considers the effect of high temperature and has good agreement with the test results.
29 May 2026 in Journal of Testing and Evaluation
The mechanical performances of carbon fiber reinforced plastic (CFRP) and aluminum alloy tube reinforced round-ended concrete columns were investigated in this paper. Eight axial compression tests on specimens with circular ends of CFRP–aluminum tubular round-ended concrete columns were designed and made. The axial compression test and theoretical research were carried out. The results show that CFRP improves the confinement of aluminum alloy tube to core concrete, and improves the bearing capacity and ductility of specimens. The maximum axial bearing capacity and ductility of aluminum alloy pipe with the same section size increased by 30.8 % and 43.4 %, respectively. The composite constraint model for calculating the bearing capacity of concrete columns reinforced by CFRP–aluminum tubes is proposed. The calculation results obtained by this calculation method are in good agreement with the experimental values. The model can be used to analyze the axial compression performance of CFRP–aluminum tube reinforced round-ended concrete columns.