10 March 2022 in ACS Photonics
16 November 2020 in Proceedings of the National Academy of Sciences
Colorimetric sensors offer the prospect for on-demand sensing diagnostics in simple and low-cost form factors, enabling rapid spatiotemporal inspection by digital cameras or the naked eye. However, realizing strong dynamic color variations in response to small changes in sample properties has remained a considerable challenge, which is often pursued through the use of highly responsive materials under broadband illumination. In this work, we demonstrate a general colorimetric sensing technique that overcomes the performance limitations of existing chromatic and luminance-based sensing techniques. Our approach combines structural color optical filters as sensing elements alongside a multichromatic laser illuminant. We experimentally demonstrate our approach in the context of label-free biosensing and achieve ultrasensitive and perceptually enhanced chromatic color changes in response to refractive index changes and small molecule surface attachment. Using structurally enabled chromaticity variations, the human eye is able to resolve ∼0.1-nm spectral shifts with low-quality factor (e.g., Q ∼ 15) structural filters. This enables spatially resolved biosensing in large area (approximately centimeters squared) lithography-free sensing films with a naked eye limit of detection of ∼3 pg/mm2, lower than industry standard sensors based on surface plasmon resonance that require spectral or angular interrogation. This work highlights the key roles played by both the choice of illuminant and design of structural color filter, and it offers a promising pathway for colorimetric devices to meet the strong demand for high-performance, rapid, and portable (or point-of-care) diagnostic sensors in applications spanning from biomedicine to environmental/structural monitoring. Significance Modern scientific instrumentation and sensors are often bulky, expensive, and/or cumbersome to operate. Colorimetric sensors on the other hand offer a promising solution to these problems, as they can be analyzed with high spatiotemporal resolution by digital cameras or the naked eye. However, the performance of colorimetric sensors is typically inferior to the bulky/expensive alternatives as it can be difficult to convert small input stimulus variations into a large color response. This work introduces a means to address and overcome this problem and opens the door to types of high-performance colorimetric sensors, which are competitive with and/or offer greater functionality than the bulky/expensive alternatives.
23 July 2019 in Optics Express
Guided wave-optics has emerged as a promising platform for label free biosensing. However, device sensitivity toward surface-bound small molecules is directly limited by the evanescent interaction and low confinement factor with the active sensing region. Here, we report a mesoporous silicon waveguide design and inverse fabrication technique that resolves the evanescent field interaction limitation while achieving maximal transverse confinement factors and preserving single-mode operation. The waveguide sensors are characterized in a Fabry-Perot interferometer configuration and the ultra-high sensitivity to small molecule adlayers is demonstrated. We also identify dispersion to be a promising degree of freedom for exceeding the sensitivity limits predicted by the conventional non-dispersive effective medium theory.
2 July 2020 in ACS Applied Nano Materials
29 September 2020 in Optics Express
The wavefronts emerging from phase gradient metasurfaces are typically sensitive to incident beam properties such as angle, wavelength, or polarization. While this sensitivity can result in undesired wavefront aberrations, it can also be exploited to construct multifunctional devices which dynamically vary their behavior in response to tuning a specified degree of freedom. Here, we show how incident beam tilt in a one dimensional metalens naturally offers a means for changing functionality between diffraction limited focusing and the generation of non-paraxial accelerating light beams. This attractively offers enhanced control over accelerating beam characteristics in a simple and compact form factor.