24 January 2024 in Industrial & Engineering Chemistry Research
5 November 2024 in Journal of Materials Chemistry A
An LMFP@MXene@C cathode material was fabricated by electrostatic adsorption and in situ graphitization, providing optimized Li+ transmission and a stable structure featuring ultrahigh average capacity and cycle stability.
3 June 2024 in Journal of Materials Chemistry A
An in situ constructed a-MnO 2 /Ti 3 C 2 F heterojunction combines the advantages of 2D layered and amorphous structures, providing abundant ion diffusion channels that facilitate rapid Zn ion diffusion and the reversible formation of ZSH.
9 October 2023 in ACS Omega
Preventing lead-based anodes from causing high-energy consumption, lead pollution, and harmful anode slime emission is a major challenge for the current electrolytic manganese metal industry. In this work, a Ti4O7-coated titanium electrode was used as anode material (Ti/Ti4O7 anode) in manganese electrowinning process for the first time and compared with a lead-based anode (Pb anode). The Ti/Ti4O7 anode was used for galvanostatic electrolysis; the cathodic current efficiency improved by 3.22% and energy consumption decreased by 7.82%. During 8 h of electrolysis, it reduced 90.42% solution anode slime and 72.80% plate anode slime formation. Anode product characterization and electrochemical tests indicated that the Ti/Ti4O7 anode possesses good oxygen evolution activity, and γ-MnO2 has a positive catalytic effect on oxygen evolution reaction (OER), which inhibited anode Mn2+ oxidation reaction and reduced the formation of anode slime. In addition, the low charge-transfer resistance, high diffusion resistance, and dense MnO2 layer of the anode blocked the diffusion path of Mn3+ in the system and inhibited the formation of anode slime. The Ti/Ti4O7 anode exhibits excellent electrochemical performance, which provides a new idea for the selection of novel anodes, energy savings and emission reduction, and the establishment of a new mode of clean production in the electrolytic manganese metal industry.
28 March 2024 in ACS Omega
Calcification roasting-acid leaching is a clean, efficient, and environmentally friendly process, but in the roasting process, the local temperature is often too high, the heat release is not timely, and the heat transfer is blocked. Furthermore, the material is easy to sinter, which affects the final vanadium extraction effect. In this paper, a small amount of CeO2 was introduced in the roasting process of vanadium slag to promote the calcified roasting. The results showed that the vanadium leaching rate reached 93.17% with the addition of 0.1 wt % CeO2 at a roasting temperature of 750 °C, which was higher than that obtained without CeO2 addition (90.00%). The results of XPS, XRD, and SEM-EDS analyses confirmed that adding CeO2 to the roasted clinker significantly increased the proportion of pentavalent vanadium to the total vanadium by up to 28.64%. O2-TPD analysis revealed an enhanced chemisorbed oxygen with the CeO2-assisted roasting, indicated the activation of oxygen by CeO2, and resulted in an enhanced oxidation of vanadium. The work in this paper establishes an alternative route for catalytic oxidation-enhanced vanadium slag roasting, which can improve the utilization of vanadium slag at relatively lower temperatures under the action of CeO2 and is of positive significance in solving the problems of sintering and energy consumption in the roasting process.
12 November 2025 in Chemical Science
A sequenced nonlinear-current protocol optimizes reaction kinetics in Zn–Mn batteries. Nonlinear activation promotes reversible ZSH/ZMO conversion, thereby enhancing cycling stability and thermal robustness.