1 March 2017 in Geophysics
Wavefront tomography is known to be an efficient and stable approach for velocity inversion that does not require accurate starting models and does not interact directly with the prestack data. Instead, the original data are transformed to physically meaningful wavefront attribute fields. These can be automatically estimated using local-coherence analysis by means of the common-reflection-surface (CRS) stack, which has been shown to be a powerful tool for data analysis and enhancement. In addition, the zero-offset wavefront attributes acquired during the CRS stack can be used for sophisticated subsequent processes such as wavefield characterization and separation. Whereas in previous works, wavefront tomography has been applied mainly to reflection data, resulting in smooth velocity models suitable for migration of targets with moderately complex overburden, we have emphasized using the diffracted contributions in the data for velocity inversion. By means of simple synthetic examples, we reveal the potential of diffractions for velocity inversion. On industrial field data, we suggest a joint inversion based on reflected and diffracted contributions of the measured wavefield, which confirms the general finding that diffraction-based wavefront tomography can help to increase the resolution of the velocity models. Concluding our work, we compare the quality of a reverse time migrated result using the estimated velocity model with the result based on the inversion of reflections, which reveals an improved imaging potential for a complex salt geometry.
25 February 2019 in Geophysical Journal International
Multiparameter stacking schemes like the common-reflection-surface (CRS) stack have shown to yield reliable results even for strongly noise-contaminated data. This is particularly useful for low-amplitude events such as diffractions, but also in passive seismic settings. As a by-product to a zero-offset section with a significantly improved signal-to-noise ratio, the CRS stack also extracts a set of physically meaningful wavefront attributes from the seismic data, which are a powerful tool for further data analysis. These wavefront attributes describe the properties of two conceptual wavefronts emerging at the surface. While these wavefronts are hypothetical in the reflection case, for diffractions and passive seismic events the wavefront attributes describe the actually measured wavefront. Although the attributes are extracted locally from the raw data and vary laterally along the events, an analysis of their local similarity allows the global identification of measurements that stem from the same diffractor or passive source, that is, from the same location in the subsurface. In this work, we present a fully unsupervised scheme to globally identify and tag diffractions in simple and complex data by means of local attribute similarity. Due to the fact that wave propagation is a smooth process and due to the assumption of only local attribute similarity, this approach is not restricted to settings with moderate subsurface heterogeneity. We demonstrate by means of a simple example that event tagging is an essential ingredient for, for example, focusing analysis in wavefront tomography and for uncertainty analysis of velocity and localization for diffraction-only data. Although not explicitly shown in this work, the proposed method is equally applicable to passive seismic data.
1 July 2016 in Studia Geophysica et Geodaetica
26 July 2019 in Geophysical Journal International
SUMMARY: The localization of passive seismic sources in form of microseismic tremors as well as large-scale earthquakes is a key issue in seismology. While most previous studies are assuming fairly good knowledge of the underlying velocity model, we propose an automatic spatial localization and joint velocity model building scheme that is independent of detailed a priori information. The first step is a coherence analysis, estimating so-called wavefront attributes to locally describe the wavefield in terms of slopes and curvatures. In a similar fashion, we also obtain an initial guess of the source excitation times of the recorded events. The wavefront attributes constitute the input for wavefront tomography which represents the next step of the workflow and allows for a refinement of the previously evaluated source excitation times while simultaneously approximating the velocity distribution. In a last step, we use the final estimate of the velocity distribution and compute the respective image function by reverse time modelling to gain the source locations. This paper introduces the theoretical concept of our proposed approach for the general 3-D case. We analyse the feasibility of our strategy and the influences of different acquisition settings by means of a synthetic 2-D data example. In a final 3-D field data example we use the workflow to localize a deep earthquake without relying on a given velocity model. The approach can deal with high levels of noise and low signal amplitudes, respectively, as well as sparse geophone sampling. The workflow generally delivers good approximations of the long-wavelength velocity variations along with accurate source locations.
17 September 2020 in Journal of Geophysical Research: Solid Earth
A vast majority of marine geological research is based on academic seismic data collected with single‐channel systems or short‐offset multichannel seismic cables, which often lack reflection moveout for conventional velocity analysis. Consequently, our understanding of Earth processes often relies on seismic time sections, which hampers quantitative analysis in terms of depth, formation thicknesses, or dip angles of faults. In order to overcome these limitations, we present a robust diffraction extraction scheme that models and adaptively subtracts the reflected wavefield from the data. We use diffractions to estimate insightful wavefront attributes and perform wavefront tomography to obtain laterally resolved seismic velocity information in depth. Using diffraction focusing as a quality control tool, we perform an interpretation‐driven refinement to derive a geologically plausible depth‐velocity model. In a final step, we perform depth migration to arrive at a spatial reconstruction of the shallow crust. Further, we focus the diffracted wavefield to demonstrate how these diffraction images can be used as physics‐guided attribute maps to support the identification of faults and unconformities. We demonstrate the potential of this processing scheme by its application to a seismic line from the Santorini Amorgos Tectonic Zone, located on the Hellenic Volcanic Arc, which is notorious for its catastrophic volcanic eruptions, earthquakes, and tsunamis. The resulting depth image allows a refined fault pattern delineation and, for the first time, a quantitative analysis of the basin stratigraphy. We conclude that diffraction‐based data analysis has a high potential, especially when the acquisition geometry of seismic data does not allow conventional velocity analysis.
1 January 2005 in Progress In Electromagnetics Research