Department of Telecommunications Engineering and Digital Innovation, Faculty of Engineering and Technology, Rajamangala University of Technology Isan, Nakhon Ratchasima, Thailand
Auto-generated profile, based on publicly available information
P. Thitimahatthanakusol
Department of Telecommunications Engineering and Digital Innovation, Faculty of Engineering and Technology, Rajamangala University of Technology Isan, Nakhon Ratchasima, Thailand
This research proposes a quad-mode H-beam metasurface (MTS)-embedded dual-band circularly-polarized (CP) multi-tiered antenna scheme with 5G (n79) and Wi-Fi 6E capabilities. The proposed antenna scheme consists of three layers of corner-truncated FR-4 substrates without an air gap. The upper substrate contains an array of $3\times 4$ H-beam MTS elemental units tilted at 49°. The middle substrate is a copper plate with a horizontal Z-shaped slot at its center functioning as the ground plane, and the lower substrate contains a microstrip feed line. Characteristic mode analysis (CMA) is employed to optimize the circular polarization of the MTS structure. Results show that Modes 1 & 2 at 4.81 GHz and Modes 4 & 9 at 6.2 GHz contribute to CP radiation. The measured return loss bandwidths of the antenna are 19.37% (4.63 – 5.56 GHz) and 9.51% (5.97 – 6.56 GHz) for the 5G (n79) and Wi-Fi 6E bands. The measured axial ratio bandwidths are 13.33% (4.6 – 5.24 GHz) and 1.77% (6.15 – 6.26 GHz), with maximum gains of 5.2 and 3.9 dBic at 5.5 and 6.2 GHz, respectively. Unlike conventional MTS-based CP antennas which employ rectangular- or square-shaped MTS elements for single-band operation, this work utilizes H-beam-shaped MTS elemental units to achieve dual-band CP capability. Additionally, rather than traditional full-wave methods, CMA is used to optimize circular polarization. Essentially, the proposed antenna scheme is suitable for 5G (n79) and Wi-Fi 6E communications.