9 August 2019 in Journal of Materials Science
1 October 2018 in Journal of Physics D: Applied Physics
This paper demonstrates laser surface modification of silicone rubber using an economic and efficient nanosecond fibre laser. The resulting surface morphology shows that micro-nano structures leading to an increase in the surface slope were formed after processing. The effect of laser power on the surface wettability was investigated demonstrating that the contact angle of the silicone rubber surface increased with increasing laser fluence. The water contact angle on the treated surface reached ~160° with a rolling-off angle of ~3° when the laser fluence reached 10 J cm −2 . After laser processing, both the roughness and root mean square slope of the silicone rubber surface increased with increasing fluence and reached maximum at a fluence of 10 J cm −2 . An analysis of the pre- and post processing surfaces suggested there were no significant compositional changes, but there were some micro-structural changes to the polymer chain, namely, cleavage of the Si–O–Si bonds. It is thus proposed that the hierarchical micro-nano structures and hence the change in the root mean square slope of the silicone rubber surface induced by laser irradiation are the primary reasons for its superhydrophobicity. The preparation of superhydrophobic silicone rubber can have important applications in self-cleaning, anti-icing, and anti-pollution.
21 December 2023 in Composites Science and Technology
1 December 2019 in Materials Research Express
10 August 2021 in Journal of Physics D: Applied Physics
In this paper, hydrophobic/superhydrophobic silicone rubber surfaces with disordered structures were prepared with a nanosecond laser. The fractal characteristic of the surfaces was also investigated. The results show that the fractal structures on the processed silicone rubber surface can roughly reflect the increasing trend of its hydrophobicity. More specifically, the air content in the liquid–solid contact area was found to be related to the surface superhydrophobicity. The solid fraction of superhydrophobic surfaces at close to 0.22 produced with different laser pulse widths can be used to identify whether such surfaces are in the superhydrophobic state after the laser treatment. In addition, the fractal parameters and gas/solid fraction could be used to predict the contact angles of surfaces in Wenzel and Cassie–Baxter states based on the fractal wetting equations. However, it is noted that with the increase of the laser fluence, the silicone rubber surfaces enter into a mixed state where the Wenzel and Cassie–Baxter states coexist. This paper provides a new method to characterize the wettability of the surfaces with the disordered microstructures.
8 March 2021 in Physica Status Solidi (a)