6 July 2023 in Soft Matter
Coaxial atomization of a gelled jet is affected by yield stress and gas swirl. Linear instability analysis is used to explore the impact of these two factors.
1 March 2023 in Physics of Fluids
This study aims at investigating the influence of turbulence modulation caused by a thread structure on coaxial air-blast atomization by means of high-speed flow visualizations and droplet particle size techniques. The medium in the central channel of an atomizer is water while the annular channel is airflow. The results show that the thread structure added to the inner surface of an annular channel plays an important role in atomization effect. The generated liquid ligaments on the jet present more structures, which grow shorter and breakup faster than that without thread. To compare the difference in jet breakup length and droplet diameter caused by the thread structure, we establish a new breakup length model and then use the ratio of structure factors to describe the change in the droplet diameter. The results in this experiment confirm the improvement of atomization performance brought by optimization design of the thread structure.
1 December 2024 in Physics of Fluids
A series of novel phenomena emerges when the coaxial airflow rapidly blows over the quasi-solid paste jet surface, leading to the direct solid-like exfoliation breakup of protrusions on the side face and the liquid-like tensile breakup on the end face. The experimental findings unequivocally demonstrate that the vertical protrusion formation on the side face under high gas velocity serves as a precursor to the subsequent exfoliation breakup, while the tensile breakup is a consequence of axial elongation of the protrusions at the junction between the side and end faces. A crucial step in interpreting the exfoliation breakup is to discern the individual force competition at the jet interface. As gas velocity increases, the radial shear force maintains stronger than the axial drag force and becomes the dominant factor. After the formation of protrusions, the airflow component directly impacts the upper surface of the protrusion in a vertical manner and causes it to fracture similar to the cutting off of a rod-shaped solid. During tensile breakup, the protrusions on the end face develop into liquid threads, which rotate and elongate under axial airflow drag and reflux, ultimately leading to the breakup. Mathematical force models are established to elucidate this intriguing phenomenon observed in the experiments. This study of quasi-solid pastes in airflow will expand the new understanding of the interaction between gas, liquid, and solid states.