1 January 2021 in Materials Chemistry and Physics
18 June 2018 in Sensor Review
Purpose: The purpose of this work is to explore electrical properties of an electrochemical sensor designed for the detection of malachite green (MG) present in an aqueous solution.Design/methodology/approach: The present sensor consists in the spatial coupling of a polymeric membrane and an ion-sensitive electrode (platinum electrode). The preparation of the polymeric membrane involves the incorporation of an ionophore (D2HPA), a polymer (polyvinylchloride [PVC]) and a plasticizer (dioctyl phthalate [DOP]). Several techniques have been used to characterize this sensor: the cyclic voltammetry, the electrochemical impedance spectroscopy and the optical microscopy. The sensibility, the selectivity and the kinetic study of a modified platinum electrode have been evaluated by cyclic voltammetry.Findings: The obtained results reveal the possibility of a linear relationship between the current of reduction peaks and MG concentration. A linear response was obtained in a wide-concentration range that stretches from 10−5to 10−13mol L−1, with a good correlation coefficient (0.976) and a good detection limit of 5.74 × 10−14mol L−1(a signal-to-noise ratio of 3). In addition, the voltammetric response of modified electrode can be enhanced by adding a layer of Nafion membrane. Under this optimal condition, a linear relationship was obtained, with a correlation coefficient of 0.986 and a detection limit of 1.92 × 10−18mol L−1.Originality/value: In the present research, a convenient, inexpensive and reproducible method for the detection of MG was developed. The developed sensor is capable of competing against the conventional techniques in terms of speed, stability and economy.
2 May 2017 in Anti-Corrosion Methods and Materials
Purpose: The purpose of this study was to investigate the inhibitive action of some green leaves on Monel 400 alloy in acidic media.Design/methodology/approach: Green leaves ofMespilus japonica,Ricinus communis LandVitis viniferawere immersed in methanol solutions, separately, and filtrated after 48 h of immersion; the obtained filtrates were examined as corrosion inhibitors of Monel 400 alloy in hydrochloric acid solution (1.0M HCl). The performance of these inhibitors was evaluated using electrochemical impedance spectroscopy and potentiodynamic polarization. The effect of temperature on corrosion behavior of Monel 400 was also studied.Findings: The results obtained showed that all tested inhibitors performed as good corrosion inhibitors. The inhibition process is attributed to the adsorption of the inhibitors on Monel surface. The adsorption behavior was found to follow Langmiur isotherm. The inhibition efficiencies of extracts increased with increasing the concentration of each inhibitor and deceased with increasing the temperature.Practical implicationThese inhibitors could have application in industries where hydrochloric solutions were used to remove the surface impurities of Monel 400.Originality/value: This paper helps to find new corrosion inhibitors that are safe and eco-friendly.
9 October 2020 in Journal of Failure Analysis and Prevention