Department of Electrical Engineering, Sejong University, Seoul 05006, Republic of Korea; Department of Convergence Engineering for Intelligent Drone, Sejong University, Seoul 05006, Republic of Korea
Auto-generated profile, based on publicly available information
Jamal Aziz
Department of Electrical Engineering, Sejong University, Seoul 05006, Republic of Korea; Department of Convergence Engineering for Intelligent Drone, Sejong University, Seoul 05006, Republic of Korea
The surface passivation of a CMOS image sensor (CIS) is highly beneficial for the overall improvement of a device performance. We employed the thermal atomic layer deposition (T-ALD) and plasma enhanced (PE-ALD) techniques for the deposition of 20 nm HfO 2 as well as stacked with 3 and 5 nm Al 2 O 3 thin films. The HfO 2 /Si and Al 2 O 3 /HfO 2 /Si metal-oxide-semiconductor structures were used to analyze the fixed charge density ( $\text{Q}_{\mathrm {f}}$ ) and interface trap density ( $\text{D}_{\mathrm {it}}$ ). The as-synthesized samples show high $\text{D}_{\mathrm {it}}$ and $\text{Q}_{\mathrm {f}}$ values (10 12 cm −2 eV −1 ) and a minority carrier lifetime of 15–300 $\mu \text{s}$ . The finite-difference time-domain simulation of high-k dielectrics confirmed that the Al 2 O 3 (top)/HfO 2 stacked structures expected higher quantum efficiency for CIS application. The effect of vacuum annealing (VA) and forming gas annealing (FGA) treatments succeeded with the decomposition of the $\text{D}_{\mathrm {it}}$ and increase in carrier lifetime. The H 2 ambient FGA samples showed a remarkable decrease in the $\text{D}_{\mathrm {it}}$ values. To improve the overall performance of the device after passivation, we employed an Al 2 O 3 /HfO 2 bilayer structure, which showed a low $\text{D}_{\mathrm {it}}$ of 10 11 cm −2 eV −1 and a minority carrier lifetime of $\sim 3$ ,700 $\mu \text{s}$ after 400 °C and 30 min FGA. We believe that this surface passivation strategy will pave way for future CIS technology regarding the development of lower defective surface and superior performance.
20 July 2023 in Materials Science and Engineering: B