Department of Applied Chemistry, National School of Agro-Industrial Sciences (ENSAI), University of Ngaoundere, Ngaoundéré, Cameroon; Department of Chemical Engineering, University Institute of Technology (IUT), University of Ngaoundéré, Ngaoundéré, Cameroon
Auto-generated profile, based on publicly available information
Eric Noubissié
Department of Applied Chemistry, National School of Agro-Industrial Sciences (ENSAI), University of Ngaoundere, Ngaoundéré, Cameroon; Department of Chemical Engineering, University Institute of Technology (IUT), University of Ngaoundéré, Ngaoundéré, Cameroon
Slaughterhouse effluent treatment processes require daily technological adjustments for better efficiency. With a view to combine adsorption to biological treatment, this work aims at evaluating the capacity of simultaneous elimination of nitrogen (NH4+, NO2−, NO3−), phosphates (PO43−) and organic (MO) charges contained in the slaughterhouse effluent, by adsorption on an adsorbent (carbon) made from sawdust Triplochyton scleroxylon (Ayous). To achieve this, the effluent to be treated was sampled in a cattle slaughterhouse in the town of Ngaoundéré. After physicochemical characterization, this effluent underwent various adsorption tests in two reactors operating in batch. Parameters such as the influence of the initial concentration and the initial pH of the effluent, the adsorption capacity of the pollutant load of the slaughterhouse effluent and the contact time were followed during these adsorption tests. The kinetics and absorption mechanisms of organic pollutants, nitrogen and phosphates were modelled. At the end of the manipulations carried out, the results obtained reveal that the average adsorption equilibrium time is 60 min with abatement rates varying between 31% and 52% for the three forms of nitrogen (NO3−, NO2−, NH4+), 40.7% and 52% for organic matter and phosphate respectively. The adsorption of MO, NO3−, NO2−, NH4+ and PO43− on the adsorbent based Ayous is globally optimal at pH 4, and is governed by the pseudo-second order kinetic model. This adsorption takes place both in monolayer and multilayer. The adsorbent made from Ayous sawdust, in combination with the biological treatment will significantly improve the efficiency of the treatment of slaughterhouse effluent.
24 March 2021 in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles
The exploitation of our forests generates waste, amongst which sawdust produces approximately cubic meter per year. The objective of this work is to contribute to the improvement of the recovery process of this waste through the optimization of the pre-treatment stage of sawdust from Ayous (Triplochiton scleroxylon) by the organosolv process in order to produce bioethanol. To achieve this objective, Ayous sawdust was sampled and then characterized, followed by the pre-treatment through organosolv process. During pre-treatment, a composite experimental design centred on three factors (temperature, time, ethanol concentration) was used to study their effects on extraction of pentoses, reducing sugars and phenolic compounds. Analysis shows that Ayous sawdust contains 45.33 ± 5.5% cellulose, 30.32 ± 1.95% lignin and 20.03 ± 3.5% hemicellulose. To release the maximum of pentoses, reducing sugars and the minimum of phenolic compounds, an organosolv pre-treatment of this substrate should be carried out at 209.08 °C for 47.60 min with an ethanol–water ratio of 24.02%. Temperature is the factor having the most positive influence on the pre-treatment process whereas, ethanol concentration is not an essential factor. Organosolv pre-treatment is an effective process for delignification of the lignocellulosic structure of Ayous sawdust.
7 August 2017 in Euro-Mediterranean Journal for Environmental Integration
The specific contributions of the different bacterial flora during the biological treatment of slaughterhouse effluents remain unclear. The objective of this study is to identify the different microbial flora which mainly contribute to the efficiency of the biodegradation of the organic, nitrogenous and phosphate loads contained in the slaughterhouse effluent during its biological treatment. To achieve this, the effluent to be treated was sampled from three slaughterhouses in the city of Ngaoundéré (Cameroon). The various effluents underwent a physicochemical and microbiological characterization. The effluent was subjected to biological treatment. The biodegradation process (biological treatment) took place in two reactors, each operating in batch. One of the two reactors was supplied with oxygen (aeration). The effluent being treated underwent a physicochemical and microbiological characterization for 30 days. The results obtained show organic matter and ammonium contents >1,000 mgO2/L in each of the three effluents. Bacillus cereus (69 × 108 CFU/mL), Pseudomonas aeruginosa (201 × 107 colony forming unit (CFU)/mL) and Yeasts (101 × 106 CFU/mL) globally constitute the majority of microbial groups among the seven microorganisms identified in the effluents of the three slaughterhouses. There is no real oxygenation effect of the medium on the growth of the three microbial flora during the treatment.
6 August 2024 in World Journal of Applied Chemistry
The gold extraction process by mercury amalgamation is recognized worldwide as a process presenting an environmental and health risk linked to mercury contamination of the geo and biosphere close to the gold panning site. The aim of this work is to assess the risk of contamination by mercury of populations living in the locality of Bétaré-oya, which is subject to the phenomenon of small-scale artisanal mining. In order to achieve this, a small social survey was carried out on two gold extraction sites in the locality of Bétaré-oya. Samples of sediment, water and fish were also taken from these sites. After characterization, these samples underwent the total mercury was determined by an automatic mercury analyzer. Moreover, the methyl mercury was extracted from the samples and analyzed by inductively coupled plasma mass spectrometer coupled to gas chromatography and by gas chromatography coupled to an electron capture detector. The results obtained showed total mercury concentrations varying from 386 to 5072 µg/kg in sediments and from 24.6 to 8451 ng/L in water. Methyl mercury was measured at concentrations ranging from 7.62 to 165 µg/kg in sediments, from 2.54 to 15 µg/L and from 45.4 to 90.8 µg/kg in fish. Well water (15.0 ± 2.4 µg/L of methyl mercury) which is consumed by the populations of the study site, and fish contaminated with an average concentration of 68 µg/kg of Methyl mercury, represent the main vectors of the risk of direct contamination of the populations of the locality of Bétaré-oya by this pollutant.