Junil Choi

Junil Choi

Auto-generated profile, based on publicly available information

Junil Choi

School of Electrical Engineering, Korea Advanced Institute of Science and Technology, Daejeon, South Korea

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2016 in IEEE Communications Magazine
Verified
Journal Article
Closed access
JCJunil Choi
Junil Choi
VVVutha Va
Vutha Va
NGNuria Gonzalez-Prelcic
Nuria Gonzalez-Prelcic
RDRobert Daniels
Robert Daniels
CBChandra R. Bhat
Chandra R. Bhat
RHRobert Heath
Robert Heath
As driving becomes more automated, vehicles are being equipped with more sensors generating even higher data rates. Radars are used for object detection, visual cameras as virtual mirrors, and LIDARs for generating high resolution depth associated range maps, all to enhance the safety and efficiency of driving. Connected vehicles can use wireless communication to exchange sensor data, allowing them to enlarge their sensing range and improve automated driving functions. Unfortunately, conventional technologies, such as DSRC and 4G cellular communication, do not support the gigabit-per-second data rates that would be required for raw sensor data exchange between vehicles. This article makes the case that mmWave communication is the only viable approach for high bandwidth connected vehicles. The motivations and challenges associated with using mmWave for vehicle-to-vehicle and vehicle-to-infrastructure applications are highlighted. A high-level solution to one key challenge - the overhead of mmWave beam training - is proposed. The critical feature of this solution is to leverage information derived from the sensors or DSRC as side information for the mmWave communication link configuration. Examples and simulation results show that the beam alignment overhead can be reduced by using position information obtained from DSRC.

17 November 2017 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
PKPreeti Kumari
Preeti Kumari
JCJunil Choi
Junil Choi
NGNuria Gonzalez-Prelcic
Nuria Gonzalez-Prelcic
RHRobert Heath
Robert Heath
Millimeter-wave (mmWave) radar is widely used in vehicles for applications such as adaptive cruise control and collision avoidance. In this paper, we propose an IEEE 802.11ad based radar for long-range radar (LRR) applications at the 60 GHz unlicensed band. We exploit the preamble of a single-carrier physical layer frame, which consists of Golay complementary sequences with good correlation properties that make it suitable for radar. This system enables a joint waveform for automotive radar and a potential mmWave vehicular communication system based on the mmWave consumer wireless local area network standard, allowing hardware reuse. To formulate an integrated framework of vehicle-to-vehicle communication and LRR, we make typical assumptions for LRR applications, incorporating the full duplex radar operation. This new feature is motivated by the recent development of systems with sufficient isolation and self-interference cancellation. We develop single- and multi-frame radar receiver algorithms for target detection as well as range and velocity estimation for both single and multi-target scenarios. Our proposed radar processing algorithms leverage channel estimation and time-frequency synchronization techniques used in a conventional IEEE 802.11ad receiver with minimal modifications. Analysis and simulations show that in a single-target scenario, a gigabits-per-second data rate is achieved simultaneously with cm-level range accuracy and cm/s-level velocity accuracy. The target vehicle is detected with a high probability (above 99.99%) at a low false alarm rate of 10-6 for an equivalent isotropically radiated power of 40 dBm up to a vehicle separation distance of about 200 m. The proposed IEEE 802.11ad-based radar meets the minimum accuracy/resolution requirement of range and velocity estimates for LRR applications.

23 March 2016 in IEEE Transactions on Communications
Verified
Journal Article
Closed access
JCJunil Choi
Junil Choi
JMJianhua Mo
Jianhua Mo
RHRobert Heath
Robert Heath
In massive multiple-input multiple-output (MIMO) systems, it may not be power efficient to have a pair of high-resolution analog-to-digital converters (ADCs) for each antenna element. In this paper, a near maximum likelihood (nML) detector for uplink multiuser massive MIMO systems is proposed where each antenna is connected to a pair of one-bit ADCs, i.e., one for each real and imaginary component of the baseband signal. The exhaustive search over all the possible transmitted vectors required in the original maximum likelihood (ML) detection problem is relaxed to formulate an ML estimation problem. Then, the ML estimation problem is converted into a convex optimization problem which can be efficiently solved. Using the solution, the base station can perform simple symbol-by-symbol detection for the transmitted signals from multiple users. To further improve detection performance, we also develop a two-stage nML detector that exploits the structures of both the original ML and the proposed (one-stage) nML detectors. Numerical results show that the proposed nML detectors are efficient enough to simultaneously support multiple uplink users adopting higher-order constellations, e.g., 16 quadrature amplitude modulation. Since our detectors exploit the channel state information as part of the detection, an ML channel estimation technique with one-bit ADCs that shares the same structure with our proposed nML detector is also developed. The proposed detectors and channel estimator provide a complete low power solution for the uplink of a massive MIMO system.

21 March 2014 in IEEE Journal of Selected Topics in Signal Processing
Verified
Journal Article
Closed access
JCJunil Choi
Junil Choi
DLDavid J. Love
David J. Love
PBPatrick Bidigare
Patrick Bidigare
The concept of deploying a large number of antennas at the base station, often called massive multiple-input multiple-output (MIMO), has drawn considerable interest because of its potential ability to revolutionize current wireless communication systems. Most literature on massive MIMO systems assumes time division duplexing (TDD), although frequency division duplexing (FDD) dominates current cellular systems. Due to the large number of transmit antennas at the base station, currently standardized approaches would require a large percentage of the precious downlink and uplink resources in FDD massive MIMO be used for training signal transmissions and channel state information (CSI) feedback. To reduce the overhead of the downlink training phase, we propose practical open-loop and closed-loop training frameworks in this paper. We assume the base station and the user share a common set of training signals in advance. In open-loop training, the base station transmits training signals in a round-robin manner, and the user successively estimates the current channel using long-term channel statistics such as temporal and spatial correlations and previous channel estimates. In closed-loop training, the user feeds back the best training signal to be sent in the future based on channel prediction and the previously received training signals. With a small amount of feedback from the user to the base station, closed-loop training offers better performance in the data communication phase, especially when the signal-to-noise ratio is low, the number of transmit antennas is large, or prior channel estimates are not accurate at the beginning of the communication setup, all of which would be mostly beneficial for massive MIMO systems.

19 October 2016 in IEEE Transactions on Wireless Communications
Verified
Journal Article
Open access
CMChristopher Mollen
Christopher Mollen
JCJunil Choi
Junil Choi
ELErik G. Larsson
Erik G. Larsson
RHRobert Heath
Robert Heath
Analog-to-digital converters (ADCs) stand for a significant part of the total power consumption in a massive multiple-input multiple-output (MIMO) base station. One-bit ADCs are one way to reduce power consumption. This paper presents an analysis of the spectral efficiency of single-carrier and orthogonal-frequency-division-multiplexing (OFDM) transmission in massive MIMO systems that use one-bit ADCs. A closed-form achievable rate, i.e., a lower bound on capacity, is derived for a wideband system with a large number of channel taps that employ low-complexity linear channel estimation and symbol detection. Quantization results in two types of error in the symbol detection. The circularly symmetric error becomes Gaussian in massive MIMO and vanishes as the number of antennas grows. The amplitude distortion, which severely degrades the performance of OFDM, is caused by variations between symbol durations in received interference energy. As the number of channel taps grows, the amplitude distortion vanishes and OFDM has the same performance as single-carrier transmission. A main conclusion of this paper is that wideband massive MIMO systems work well with one-bit ADCs.

14 November 2016 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Open access
VVVutha Va
Vutha Va
JCJunil Choi
Junil Choi
RHRobert Heath
Robert Heath
Millimeter wave (mmWave) has great potential in realizing high data rates, thanks to the large spectral channels. It is considered as a key technology for fifth-generation (5G) wireless networks and is already used in wireless LAN (e.g., IEEE 802.11ad). Using mmWave for vehicular communications, however, is often viewed with some skepticism due to a misconception that the Doppler spread would become too large at these high frequencies. This is not necessarily true when directional beams are employed. In this paper, closed-form expressions relating the channel coherence time and beamwidth are derived. Unlike prior work that assumed perfect beam pointing, the pointing error due to the receiver motion is incorporated to show that there exists a nonzero optimal beamwidth that maximizes the coherence time. We define a novel concept of beam coherence time, which is an effective measure of beam alignment frequency. Using the derived correlation function, the channel coherence time, and the beam coherence time, an overall performance metric considering both the channel time variation and the beam alignment overhead is derived. Using this metric, it is shown that beam realignment in every beam coherence time performs better than beam realignment in every channel coherence time.