A novel four-way multilayer substrate integrated waveguide (SIW) power divider with slot coupling structure is proposed in this letter. Two rectangular slots located in the right and left arms of SIW T-junction are employed to achieve efficient transition with two microstrip lines. Good impedance matching and signal transmission between SIW and microstrip lines are achieved. Two isolation resistors are used to improve the isolation between output ports. The even- and odd-mode analysis method is used in the proposed circuit. A prototype of the presented power divider is designed, fabricated, and measured. The measured results show a reasonable agreement with the simulated ones.
22 March 2019 in Journal of Infrared, Millimeter, and Terahertz Waves
In this paper, a method to reconstruct the diffraction field in a millimeter-wave substrate integrated waveguide ten-way power divider by shape optimization technology is proposed. The diffraction field is reconstructed by changing the location of the metallized via hole array, which can be regarded as a continuous cylindrical reflector. The receiving diffraction field is optimized to a quasi-plane wave to be received by a transition array to achieve good magnitude and phase balance as a power dividing circuit. The proposed power divider is operated at the center frequency of 33 GHz, and over the entire Ka-band 26.5–40 GHz the return loss is less than −21 dB. The simulated insertion loss is about −12.6 dB corresponding to 54.7% power combining efficiency considering the dielectric loss, conductor loss, and radiation loss.