Yasin Cotur

Yasin Cotur

Auto-generated profile, based on publicly available information

Yasin Cotur

Imperial College London, Department of Bioengineering, Royal School of Mines

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 February 2024 in Science Advances
Verified
Journal Article
Open access
PCPhilip Coatsworth
Philip Coatsworth
YCYasin Cotur
Yasin Cotur
ANAtharv Naik
Atharv Naik
TATarek Asfour
Tarek Asfour
ACAlex Silva-Pinto Collins
Alex Silva-Pinto Collins
FGFirat Guder
Firat Guder
Traditional single-point measurements fail to capture dynamic chemical responses of plants, which are complex, nonequilibrium biological systems. We report TETRIS ( t ime-resolved e lectrochemical t echnology for plant r oot environment i n s itu chemical sensing), a real-time chemical phenotyping system for continuously monitoring chemical signals in the often-neglected plant root environment. TETRIS consisted of low-cost, highly scalable screen-printed electrochemical sensors for monitoring concentrations of salt, pH, and H 2 O 2 in the root environment of whole plants, where multiplexing allowed for parallel sensing operation. TETRIS was used to measure ion uptake in tomato, kale, and rice and detected differences between nutrient and heavy metal ion uptake. Modulation of ion uptake with ion channel blocker LaCl 3 was monitored by TETRIS and machine learning used to predict ion uptake. TETRIS has the potential to overcome the urgent “bottleneck” in high-throughput screening in producing high-yielding plant varieties with improved resistance against stress.

25 February 2020 in Advanced Functional Materials
Verified
Journal Article
Open access
PDF file
YCYasin Cotur
Yasin Cotur
MKMichael Kasimatis
Michael Kasimatis
MKMatti Kaisti
Matti Kaisti
SOSelin Olenik
Selin Olenik
CGCharis Georgiou
Charis Georgiou
FGFirat Guder
Firat Guder
A highly flexible, stretchable, and mechanically robust low‐cost soft composite consisting of silicone polymers and water (or hydrogels) is reported. When combined with conventional acoustic transducers, the materials reported enable high performance real‐time monitoring of heart and respiratory patterns over layers of clothing (or furry skin of animals) without the need for direct contact with the skin. The approach enables an entirely new method of fabrication that involves encapsulation of water and hydrogels with silicones and exploits the ability of sound waves to travel through the body. The system proposed outperforms commercial, metal‐based stethoscopes for the auscultation of the heart when worn over clothing and is less susceptible to motion artefacts. The system both with human and furry animal subjects (i.e., dogs), primarily focusing on monitoring the heart, is tested; however, initial results on monitoring breathing are also presented. This work is especially important because it is the first demonstration of a stretchable sensor that is suitable for use with furry animals and does not require shaving of the animal for data acquisition.

12 February 2024 in Biosensors and Bioelectronics
Verified
Journal Article
Open access
LGLaura Gonzalez-Macia
Laura Gonzalez-Macia
YLYunpeng Li
Yunpeng Li
KZKaijia Zhang
Kaijia Zhang
ENEstefania Nunez-Bajo
Estefania Nunez-Bajo
GBGiandrin Barandun
Giandrin Barandun
FGFirat Guder
Firat Guder
Rapid detection of pathogens at the point-of-need is crucial for preventing the spread of human, animal and plant diseases which can have devastating consequences both on the lives and livelihood of billions of people. Colorimetric, lateral flow assays consisting of a nitrocellulose membrane, are the preferred format today for low-cost on-site detection of pathogens. This assay format has, however, historically suffered from poor analytical performance and is not compatible with digital technologies. In this work, we report the development of a new class of digital diagnostics platform for precision point-of-need testing. This new versatile platform consists of two important innovations: i) A wireless and batteryless, microcontroller-based, low-cost Near Field Communication (NFC)-enabled potentiostat that brings high performance electroanalytical techniques (cyclic voltammetry, chronoamperometry, square wave voltammetry) to the field. The NFC-potentiostat can be operated with a mobile app by minimally trained users; ii) A new approach for producing nitrocellulose membranes with integrated electrodes that facilitate high performance electrochemical detection at the point-of-need. We produced an integrated system housed in a 3D-printed phone case and demonstrated its use for the detection of Maize Mosaic Virus (MMV), a plant pathogen, as a proof-of-concept application.

14 July 2022 in Advanced Materials
Verified
Journal Article
Open access
YCYasin Cotur
Yasin Cotur
SOSelin Olenik
Selin Olenik
TATarek Asfour
Tarek Asfour
MBMichael Bruyns‐Haylett
Michael Bruyns‐Haylett
MKMichael Kasimatis
Michael Kasimatis
Fahad AlshabounaFahad Alshabouna
Fahad Alshabouna
A bio‐inspired continuous wearable respiration sensor modeled after the lateral line system of fish is reported which is used for detecting mechanical disturbances in the water. Despite the clinical importance of monitoring respiratory activity in humans and animals, continuous measurements of breathing patterns and rates are rarely performed in or outside of clinics. This is largely because conventional sensors are too inconvenient or expensive for wearable sensing for most individuals and animals. The bio‐inspired air‐silicone composite transducer (ASiT) is placed on the chest and measures respiratory activity by continuously measuring the force applied to an air channel embedded inside a silicone‐based elastomeric material. The force applied on the surface of the transducer during breathing changes the air pressure inside the channel, which is measured using a commercial pressure sensor and mixed‐signal wireless electronics. The transducer produced in this work are extensively characterized and tested with humans, dogs, and laboratory rats. The bio‐inspired ASiT may enable the early detection of a range of disorders that result in altered patterns of respiration. The technology reported can also be combined with artificial intelligence and cloud computing to algorithmically detect illness in humans and animals remotely, reducing unnecessary visits to clinics.

2 December 2020 in Nature Communications
Verified
Journal Article
Open access
PDF file
ENEstefania Nunez-Bajo
Estefania Nunez-Bajo
ACAlexander Silva Pinto Collins
Alexander Silva Pinto Collins
MKMichael Kasimatis
Michael Kasimatis
YCYasin Cotur
Yasin Cotur
TATarek Asfour
Tarek Asfour
FGFirat Guder
Firat Guder
Rapid screening and low-cost diagnosis play a crucial role in choosing the correct course of intervention when dealing with highly infectious pathogens. This is especially important if the disease-causing agent has no effective treatment, such as the novel coronavirus SARS-CoV-2, and shows no or similar symptoms to other common infections. Here, we report a disposable silicon-based integrated Point-of-Need transducer (TriSilix) for real-time quantitative detection of pathogen-specific sequences of nucleic acids. TriSilix can be produced at wafer-scale in a standard laboratory (37 chips of 10 × 10 × 0.65 mm in size can be produced in 7 h, costing ~0.35 USD per device). We are able to quantitatively detect a 563 bp fragment of genomic DNA of Mycobacterium avium subspecies paratuberculosis through real-time PCR with a limit-of-detection of 20 fg, equivalent to a single bacterium, at the 35th cycle. Using TriSilix, we also detect the cDNA from SARS-CoV-2 (1 pg) with high specificity against SARS-CoV (2003).

25 March 2020 in bioRxiv
Verified
Preprint
Open access
PDF file
ENEstefania Nunez-Bajo
Estefania Nunez-Bajo
MKMichael Kasimatis
Michael Kasimatis
YCYasin Cotur
Yasin Cotur
TATarek Asfour
Tarek Asfour
ACAlex Collins
Alex Collins
FGFirat Guder
Firat Guder
Rapid screening and low-cost diagnosis play a crucial role in choosing the correct course of intervention e.g., drug therapy, quarantine, no action etc. when dealing with highly infectious pathogens. This is especially important if the disease-causing agent has no effective treatment, such as the novel coronavirus SARS-CoV-2 (the pathogen causing COVID-19), and shows no or similar symptoms to other common infections. We report a silicon-based integrated Point-of-Need (PoN) transducer (TriSilix) that can chemically-amplify and detect pathogen-specific sequences of nucleic acids (NA) quantitatively in real-time. Unlike other silicon-based technologies, TriSilix can be produced at wafer-scale in a standard laboratory; we have developed a series of methodologies based on metal-assisted chemical (wet) etching, electroplating, thermal bonding and laser-cutting to enable a cleanroom-free low-cost fabrication that does not require processing in an advanced semiconductor foundry. TriSilix is, therefore, resilient to disruptions in the global supply chain as the devices can be produced anywhere in the world. To create an ultra-low-cost device, the architecture proposed exploits the intrinsic properties of silicon and integrates three modes of operation in a single chip: i) electrical (Joule) heater, ii) temperature sensor ( i.e. thermistor) with a negative temperature coefficient that can provide the precise temperature of the sample solution during reaction and iii) electrochemical sensor for detecting target NA. Using TriSilix, the sample solution can be maintained at a single, specific temperature (needed for isothermal amplification of NA such as Recombinase Polymerase Amplification (RPA) or cycled between different temperatures (with a precision of ±1.3°C) for Polymerase Chain Reaction (PCR) while the exact concentration of amplicons is measured quantitatively and in real-time electrochemically. A single 4-inch Si wafer yields 37 TriSilix chips of 10×10×0.65 mm in size and can be produced in 7 hours, costing ~US $0.35 per device. The system is operated digitally, portable and low power – capable of running up to 35 tests with a 4000 mAh battery (a typical battery capacity of a modern smartphone). We were able to quantitatively detect a 563-bp fragment (Insertion Sequence IS 900 ) of the genomic DNA of M. avium subsp. paratuberculosis (extracted from cultured field samples) through PCR in real-time with a Limit-of-Detection of 20 fg, equivalent to a single bacterium, at the 30 th cycle. Using TriSilix, we also detected the cDNA from SARS-CoV-2 (1 pg), through PCR, with high specificity against SARS-CoV (2003).