Yaroslav Kremets

Yaroslav Kremets

Auto-generated profile, based on publicly available information

Yaroslav Kremets

National University of Life and Environmental Sciences of Ukraine

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

27 December 2024 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
SPSerhii Pylypaka
Serhii Pylypaka
VNVictor Nesvidomin
Victor Nesvidomin
TVTatiana Volina
Tatiana Volina
IHIryna Hryshchenko
Iryna Hryshchenko
TPTaras Pylypaka
Taras Pylypaka
YSYuriy Semirnenko
Yuriy Semirnenko
The object of this study is the deformation of an elastic axis with a large deflection of a cantilever clamped absolutely elastic rod under the action of an applied concentrated force. The rod in the free state can have a rectilinear or curved elastic axis. This fact implies a difference in the analytical description of the bending process. However, there is a factor by which some similarity can be found between the bending of rectilinear and curved rods. This factor is the curvature of the elastic axis of the rod in a free state. According to this feature, they can be divided into rods of constant and variable curvature of the elastic axis. The former include rectilinear rods and those that in the free state have the shape of an arc of a circle, and the latter – rods with a variable curvature of the elastic axis. There is a difference between the bending of these groups of rods: in the first case, the deformation of the elastic axis of the rod during its bending will be the same regardless of which end will be cantilever pinched. A distinctive feature of the current research is that the bending of rods with variable curvature of the elastic axis was carried out by alternate pinching of their opposite ends. Moreover, the rods of constant and variable curvature were of the same length s=0.314 m, the same cross-section of 0.005×0.02 m. That has made it possible to visually show the difference between the shape of the elastic axis of the bent rod under the action of the same force when the pinch end is changed. When attached to the rods of the working bodies of agricultural machines, pulsating dynamic loads are smoothed out due to their elasticity. It is important for practice to be able to calculate the value of their deviation, which should be within the given limits. The results are explained by the fact that in the analytical description of the shape of the elastic axis of a curved rod, a technique was proposed in which the length of the axis can start counting both from one end and from the opposite end


26 February 2025 in APPLIED GEOMETRY AND ENGINEERING GRAPHICS
Verified
Journal Article
Open access
PDF file
TKTetiana Kresan
Tetiana Kresan
SPSerhiy Pylypaka
Serhiy Pylypaka
TPTaras Pylypaka
Taras Pylypaka
YKYaroslav Kremets
Yaroslav Kremets
IHIryna Hryshchenko
Iryna Hryshchenko
ІГІрина Грищенко
Ірина Грищенко
The bending of the surfaces of the binormals by deformation of the directing curve, which is the slope line, is considered. Such deformation changes the curvature of the curve, but it remains a slope line. The rectilinear generators of the surfaces at deformation of the curve coincide with the unit binormal of the accompanying trihedral at all its points. Parametric equations of continuous bending of these surfaces have been made by changing the angle of inclination of the directional slope line. The initial slope curve is given by the angle of its rise and the conformity of change of curvature as a function of arc length. The partial case where the curvature of the initial curve is constant is considered. In this case, it is shown that helicoids, including the screw conoid, are the set of surface bends. Specific examples are considered. According to the obtained equations, the surfaces that are the bending of the initial are constructed. The doctrine of bending is an important part of the differential geometry of surfaces. The most studied in theoretical terms is the bending of the developable surfaces, because the particular case of bending such surfaces on the plane, that is, obtaining an involute, is applied. It is a well-known theorem on the possibility of bending screw surfaces into the surfaces of revolution. A classic example is the bending of a screw conoid into a catenoid. Screw lines of a surface at its bending gradually deform, their step decreases, until they turn into the parallels of a surface of revolution. Nondevelopable ruled surfaces can also be bent like developable ones, that is, deform the directing curve in such a way that rectilinear generators remain straight. This article is devoted to this bending of ruled non developable surfaces, where the slope line is a directing curve of the surface. Bending of linear unbranched surfaces can be carried out in the same way as unfolded, that is, with the preservation of rectilinear twists. A partial case of such bending is the bending of the surface of the binormals of the spatial curve guide. When the surface is bent, the guide curve is deformed so that its twist as a function of the arc length remains unchanged. Using the example of slope curves, which are directional curves of the surface of binormals, generalized parametric equations of bending such surfaces by changing the angle of their rise are obtained. When this angle increases to a limit value of 90°, the surface is transformed so that the slope curve turns into a straight line. The result of the bending of the surface of the binormals of the helical line is the helicoids and the helical conoid with a maximum lifting angle of 90 °.

30 April 2025 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
ANAndrii Nesvidomin
Andrii Nesvidomin
SPSerhii Pylypaka
Serhii Pylypaka
TVTatiana Volina
Tatiana Volina
ZRZinovii Ruzhilo
Zinovii Ruzhilo
OKOlena Kozlova
Olena Kozlova
ARAlla Rebrii
Alla Rebrii
The object of this study is a helical sweeping surface or a helicoid torso and the process of its design according to predefined structural parameters. Helical surfaces are widely used in engineering practice. They have become widespread in devices for transporting various materials, as well as in agricultural machinery. The problem is that when they are manufactured, the technique of their formation from the point of view of analytical description is not always taken into account. Helical surfaces can be linear and nonlinear. Linear surfaces, or helicoids, are formed by the helical motion of a straight-line generatrix around an axis, and the generatrix can intersect it or be coincident. If the straight-line generatrix intersects the axis at a right angle, then the helicoid will be a helical conoid, which is very common in technology under the name of a screw. Certain conditions are imposed on the helical motion of the straight-line generatrix of a helicoid torso. Its main advantage among other helicoids is the possibility of constructing an exact sweep. All other helicoids cannot be swept. For their manufacture, an approximate sweep is found, which is deformed into the desired shape. At the same time, the energy intensity of the process of deformation of this sweep into the finished product increases due to overcoming significant plastic deformations. As a result of this research, dependences were established that make it possible to construct a set of helicoid torsos that pass through the predefined helical line. The results are based on the differential characteristics of the surface. These are their distinctive features from known results, according to which only one helicoid torso corresponds to the predefined helical line. This paper shows the practical application of the helicoid torso as a supporting turn of the narrowing screw of a forage harvester with a radius of R=0.25 m of the outer edge and r=0.125 m of the inner one