Conor O'KEeffe

Conor O'KEeffe

Auto-generated profile, based on publicly available information

Conor O'KEeffe

Trinity Centre for Biomedical Engineering, Trinity Biomedical Sciences Institute, Trinity College Dublin, Dublin, Ireland; Department of Mechanical, Manufacturing and Biomedical Engineering, School of Engineering, Trinity College Dublin, Dublin, Ireland; Advanced Materials and Bioengineering Research Centre (AMBER), Ireland

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2024 in Journal of Biomedical Materials Research Part A
Verified
Journal Article
Open access
COConor O'Keeffe
Conor O'Keeffe
MKMarcin Kotlarz
Marcin Kotlarz
IGInês F. Gonçalves
Inês F. Gonçalves
CLCaitriona Lally
Caitriona Lally
DKDaniel Kelly
Daniel Kelly
Porous titanium scaffolds fabricated by powder bed fusion additive manufacturing techniques have been widely adopted for orthopedic and bone tissue engineering applications. Despite the many advantages of this approach, topological defects inherited from the fabrication process are well understood to negatively affect mechanical properties and pose a high risk if dislodged after implantation. Consequently, there is a need for further post‐process surface cleaning. Traditional techniques such as grinding or polishing are not suited to lattice structures, due to lack of a line of sight to internal features. Chemical etching is a promising alternative; however, it remains unclear if changes to surface properties associated with such protocols will influence how cells respond to the material surface. In this study, we explored the response of bone marrow derived mesenchymal stem/stromal cells (MSCs) to Ti‐6Al‐4V whose surface was exposed to different durations of chemical etching. Cell morphology was influenced by local topological features inherited from the SLM fabrication process. On the as‐built surface, topological nonhomogeneities such as partially adhered powder drove a stretched anisotropic cellular morphology, with large areas of the cell suspended across the nonhomogeneous powder interface. As the etching process was continued, surface defects were gradually removed, and cell morphology appeared more isotropic and was suggestive of MSC differentiation along an osteoblastic‐lineage. This was accompanied by more extensive mineralization, indicative of progression along an osteogenic pathway. These findings point to the benefit of post‐process chemical etching of additively manufactured Ti‐6Al‐4V biomaterials targeting orthopedic applications.

17 October 2025 in Biomaterials
Verified
Journal Article
Closed access
MKMarcin Kotlarz
Marcin Kotlarz
COConor O'KEeffe
Conor O'KEeffe
GKGabriela S. Kronemberger
Gabriela S. Kronemberger
RBRoss Burdis
Ross Burdis
SRShubhasmin Rana
Shubhasmin Rana
DKDaniel Kelly
Daniel Kelly

19 August 2024 in Journal of the Mechanical Behavior of Biomedical Materials
Verified
Journal Article
Open access
COC. O'KEeffe
C. O'KEeffe
WZW. Zhang
W. Zhang
RJRobert Daniel Johnston
Robert Daniel Johnston
PPPatcharapit Promoppatum
Patcharapit Promoppatum
DTDavid Taylor
David Taylor
DKD.J. Kelly
D.J. Kelly
The material properties of individual micro-struts are critical to the overall success of lattice structures. These properties can be significantly compromised by defects inherited from powder bed fusion processes. Among these defects, porous inclusions are well understood to have a detrimental effect on mechanical properties; posing a high risk to the implant under loading. While the majority of these defects can be avoided through optimisation of printing parameters, this has generally only been done for traditional bulk components with no in-designed porosity. Furthermore, a number of studies have observed changes in the frequency of such porous inclusions as feature size is reduced, indicating a size effect. This also suggests that the optimal parameters for bulk material are not necessarily translatable to the individual micro-struts which build the lattice. In this study, the relationship between parameter optimisation and feature size was investigated. Here, a higher energy density input was required for processing micro-strut lattices with an optimised relative density, than it was for bulk components. This could be attributed to faster rates of heat loss in micro-strut samples on account of their increased surface-to-volume ratio. The consequential improvement in mechanical properties was also assessed. An increase in both strength and stiffness could be largely attributed to an increase in the percentage volume of load bearing material, while improvements in failure strain were largely driven by minimisation of stress concentrations around the irregular pore morphologies. Fatigue properties did not improve beyond the effects of yielding. Rather, crack initiation was dominated by surface defects; which on account of their surface free energy, experience a much higher stress intensity factor.

28 August 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
RJRobert Daniel Johnston
Robert Daniel Johnston
CMCiara McKenna
Ciara McKenna
COConor O&Apos;Keeffe
Conor O&Apos;Keeffe
NLNiall Linnane
Niall Linnane
SGSamuel Geraghty
Samuel Geraghty
CLCatriona Lally
Catriona Lally
Aortic coarctation accounts for 5–8% of congenital heart disease and occurs in up to 6 in every 10,000 live births. While neonatal coarctation is typically treated surgically via thoracotomy and end-to-end anastomosis, endovascular stenting has become the preferred intervention in older children and adults. Despite favourable short-term outcomes, current stent therapies remain associated with long-term risks including persistent hypertension, and this may be linked to mostly off-label use of biliary stents which limit treatment efficacy in paediatric patients. Recent advances in additive manufacturing provide an opportunity to develop bespoke metallic stents tailored to patient-specific anatomy and biomechanics.,Here, we present a preclinical framework for the design, optimisation, fabrication, and evaluation of patient-specific stents for aortic coarctation treatment. Using selective laser melting (SLM) and finite element (FE) modelling, we developed a virtual design platform to generate and optimise Ti6Al4V stent geometries for varying severities of aortic narrowing (10%, 25%, 37.5%, and 50%). The resulting stent designs, with strut width and thickness dimensions ranging from 197.50 × 190.96 µm to 296.50 × 200 µm, were optimised to achieve a target post-expansion lumen diameter of 10 mm while minimising vessel wall stress. Furthermore, modifications to the connector geometry (original to C-connector and S-connector) enhanced stent conformability and reduced vessel wall stress by up to 16.7% and 19%, respectively. Candidate stents were subsequently fabricated by additive manufacturing, post-processed, and mechanically characterised in accordance with relevant regulatory testing standards. Finally, stent deployment was assessed computationally, through benchtop and ex vivo models to evaluate functional performance and deployment feasibility, establishing that optimised Ti6Al4V stents can be used for treatment of aortic coarctations.,Collectively, this work establishes an integrated computational and manufacturing workflow for the development of customised stents for aortic coarctation and demonstrates the potential of additive manufacturing to enable next-generation patient-specific cardiovascular implants.